B
A
C
D
Figure 3. Model H8191 accessory inventory.
H8191 Accessory Inventory (Figure 3) | Qty | |
A. | Chemical Hose | 1 |
B. | Chemical Filter | 1 |
C. | 1 | |
D. | Input Hose Filter | 1 |
E.Hose Adapter
H8191 3600 PSI Diesel Pressure Washer
Assembly
Refer to Figure 1 on Page 4 for identification of components in the following steps.
To assemble the H8191:
1.Thread the spray gun wand into the spray gun and tighten securely.
2.Connect the male end of the high pressure hose to the pump output port.
3.Connect the high pressure hose quick coupler to the spray gun.
4.Connect the female end of the input hose onto the pump input port.
5.Connect the other end of the input hose to a spigot providing at least 5 GPM, or to the input hose filter, if drawing from a standing water source.
Note: Depending on the spigot fitting type, you may need to use the provided