Graco Inc 308-532 manual Installation, Check for Shipping Damage, Set Up, Connect to Water Supply

Page 5

INSTALLATION

HIGH

PRESSURE

HOSE

CONNECTION

WATER

SUPPLY

CONNECTION

Figure 1

QUICK

COUPLER TEE HANDLE (4043 ONLY)

SPRAY

GUN

QUICK

COUPLER

SPRAY

HOSE

Check for Shipping Damage

Check the unit for any damage that may have occurred in shipping. Notify the carrier immediately if there is any damage.

Set Up

Fill the battery cells with electrolyte and water. Charge the battery. Be sure the battery connections are correct and secure. Connect the fuel line to the engine using the quick coupler provided. Squeeze the priming bulb 3 to 5 times. If you are using a downstream chemical injector, install it between the pump unloader and the high pressure hose, using the quick couplers provided.

Connect the high pressure hose between the pump outlet and the gun inlet. Both of these connections are made with quick couplers.

CAUTION

Up to 100 ft (30 m) of high pressure hose may be used. Longer hoses may af fect sprayer performance, and chemical injector performance, if used.

Install the appropriate spray tip on the wand. See Installing and Changing Spray Tips. If you are using a sandblaster kit, see its separate manual for installation instructions.

Connect to Water Supply

CAUTION

Before attaching to the water supply, check your local plumbing code regarding cross– connection to the water supply . A backflow preventer , P/N 801–133, is available to prevent backflow of contaminated water into the fresh water supply . Install it upstream from the pump.

If inlet water pressure is over 60 psi (4.1 bar) a regulating water valve, P/N 800–258, must be installed at the garden hose connection.

Do not exceed 160 _￿ F (70 _￿ C) inlet water temperature.

Connect a hose with at least a 3/4 inch (19 mm) ID from the water supply to the unit’s 3/4 inch garden hose inlet. The supply hose should not be more than 50 ft (15 m) long.

NOTE: The water source at the unit must have a minimum flow rate equal to that of the unit (see Technical Data, inside back cover).

308–532 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 800-707, Series a Rev a800-706, Series a Pressure Relief Procedure General SafetySpray Gun Safety Devices Medical TreatmentFuel and Emission Hazards Hose SafetyEquipment Misuse Hazard System PressureTerms Moving Parts HazardSet Up InstallationCheck for Shipping Damage Connect to Water SupplyStartup Follow the Pressure Relief Procedure Trigger Safety LatchInstalling and Changing Spray Tips Pressure Relief Procedure MaintenanceSHUTDOWN, Flushing Storage Interval What to doProblem Cause Solution Troubleshooting ChartParts Drawing Hydra-Cleanr3540 Pressure WasherPart Description QTY Parts ListHydra-Cleanr4043 Pressure Washer Fuel Tank Assembly Pump Assembly 804-099 Kit Repair Kit Description Qty 801-041Kit Repair Kit Description Qty Servicing the Valves Pump ServiceServicing the Pumping Section Servicing the Seals and V-PackingsServicing Crankcase Section Reassembly800-649 3540 AccessoriesModel Technical DataGraco INC. P.O. BOX 1441 MINNEAPOLIS, MN Graco WarrantyImportant Phone Numbers Parts Change Notice NEW Pump Assembly Parts Description Qty USE only Genuine Graco Parts and AccessoriesKit Repair Kit Description

308-532, 800-706, 800-707 specifications

Graco Inc. is a well-respected name in the manufacturing industry, particularly known for its diverse portfolio of equipment designed for the construction, manufacturing, and maintenance sectors. Among their many offerings are the Graco models 308-532, 800-706, and 800-707, each of which embodies innovation and reliability.

The Graco 308-532 is a versatile airless sprayer that excels in applying coatings with precision. Built with a high-performance pump, it delivers a consistent flow, ensuring an even application of paint or other materials. This model is favored by contractors for its ability to handle various projects, from residential painting to large commercial jobs. Its lightweight design and portability make it easy to maneuver, while features like an adjustable pressure control provide users with the ability to fine-tune the spray pattern for different materials.

The Graco 800-706 takes performance up a notch with its robust hydraulic design. This airless sprayer is engineered for efficiency, equipping users to tackle larger jobs with ease. It boasts a powerful yet quiet motor, making it suitable for residential areas or indoor applications. One of the standout characteristics of the 800-706 is its advanced monitoring system that ensures optimal operation. Users appreciate its quick-change technology, allowing for seamless switch-outs between spray tips or hoses, facilitating a fast transition between different tasks without downtime.

Rounding out this trio is the Graco 800-707, a model engineered for heavy-duty applications. Known for its durability, it is designed to withstand the rigors of daily use on demanding job sites. The 800-707 features high-capacity tanks, allowing for extended work periods without frequent refilling. Its state-of-the-art filtration system guarantees that only clean material is used, preserving the integrity of the finish. Additionally, this model is equipped with smart technology that helps streamline the spraying process, providing diagnostics and maintenance alerts to keep it running at peak performance.

In summary, Graco’s 308-532, 800-706, and 800-707 models are exemplary representatives of the company's commitment to quality, innovation, and user-friendly design. Whether for small residential jobs or large-scale commercial projects, these sprayers offer a combination of performance, versatility, and reliability that is hard to match in the industry. With ongoing advancements in technology and relentless focus on customer needs, Graco continues to be a leader in the field of spraying equipment.
Top Page Image Contents