OPERATING INSTRUCTIONS
Step 1 Connect the high pressure hose to the unit’s high pressure outlet.
Step 2 Insert the spray wand of your choice into the spray wand extension. Push in and turn clockwise to lock spray wand in place.
4
Step 3 Connect garden hose to unit’s water inlet.
Step 5 Plug the power cord into the power out- let. Press “TEST”, then press “RESET” to assure proper connection to power. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
Step 4 Connect garden hose to the cold water source and turn water on completely.
Step 6 Turn on (I) the pressure washer. The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.