Delta DTT2450 instruction manual Storage, Engine, Pressure Washer

Page 12

STORAGE

ENGINE

Consult the Engine Owners Manual for the manufacturer's recommendations for storage.

5.Pull engine starter rope slowly several times until antifreeze comes out of high pressure hose connection of pump.

6.Remove garden hose from water

PUMP

The manufacturer recommends using a pump protector/winterizer when storing the unit for more than 30 days and/or when freezing temperatures are expected. If a pump protector/winterizer is not available, *RV antifreeze needs to be run through the pump as outlined in the steps below.

NOTE: Using a pump protector/winterizer or *RV antifreeze is to provide proper lubrication to the internal seals of the pump regardless of temperature or environment.

1.Obtain a funnel, six ounces of *RV antifreeze, and 16 - 36 inches of garden hose with a male hose connector attached to one end.

Use only RV antifreeze. Any other

antifreeze is corrosive and can damage pump.

2.Disconnect spark plug wire.

3.Connect length of garden hose to water inlet of pump.

4.Add *RV antifreeze to hose as shown.

inlet of pump.

7.Reconnect spark plug wire.

*Windshield washer fluid may also be used

PRESSURE WASHER

1.Drain all water from high pressure hose, coil it, and store it in cradle of the pressure washer handle.

2.Drain all water from spray gun and wand by holding spray gun in a vertical position with nozzle end pointing down and squeezing trigger. Store in gun holder.

3.Store chemical hose so it is protected from damage.

A04032

12- ENG

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Structioin N M Anual Consumer Safety Information Important Safety InstructionsRisk of Explosion or Fire Risk of Explosion or Fire Risk to BreathingRisk to Fluid Injection Risk of Chemical Burn Risk of Electrical ShockRisk of HOT Surfaces Risk of Unsafe Operation Risk of Injury from SprayCarton Contents Operating Instructions Basic Elements of a Pressure WasherBasic Elements of AN Engine Pressure Washer TerminologyPressure Washer Operating Features HOW to Apply Chemicals and Cleaning Solvents High Pressure40º fan spray 0º pencil stream Low PressureStarting Shutting DownMaintenance Nozzle CleaningHOW to Clean the Water Inlet Filter Engine PumpStorage EnginePressure Washer Trouble Shooting Guide After period Normal use Water leaking atGun/spray wand Connection Water leakingENG A04032 Warranty

DTT2450 specifications

The Delta DTT2450 is a cutting-edge temperature and humidity data logger that caters to a wide array of industrial and scientific applications. Renowned for its precision and reliability, this device is integral in environments such as pharmaceutical, food storage, and environmental monitoring, where maintaining specific temperature and humidity levels is crucial.

One of the main features of the Delta DTT2450 is its dual-channel capability, allowing simultaneous measurement of both temperature and humidity. This enhances its versatility, enabling users to monitor two critical environmental parameters with a single device. The logger boasts a wide measurement range, with temperature readings typically spanning from -40°C to +80°C and humidity levels from 0% to 100% relative humidity. This broad range makes it suitable for a variety of settings.

The device operates using an advanced semiconductor and capacitive sensor technology, resulting in excellent accuracy and response time. The DTT2450 is designed with user-friendliness in mind, equipped with a large, easy-to-read LCD display that provides real-time data monitoring. Additionally, its intuitive interface allows for easy navigation through settings and data retrieval, even for users with minimal technical expertise.

A notable characteristic of the Delta DTT2450 is its data storage capability. It can store a significant amount of data points, allowing for extensive logging periods without the need for frequent data downloading. The logger supports various data sampling rates, customizable according to user requirements, ensuring optimal data collection in varying scenarios.

Connectivity is facilitated via USB, enabling quick and straightforward data transfer to computers for analysis. The device is compatible with specialized software that provides comprehensive data analysis and reporting tools, aiding in compliance with industry standards.

With a robust design, the DTT2450 can withstand challenging environmental conditions, making it a dependable choice for both indoor and outdoor use. It is also equipped with a long-lasting battery, ensuring extended operational periods and reducing maintenance interruptions.

In summary, the Delta DTT2450 stands out for its dual-channel monitoring, accuracy, and user-friendly design, making it an excellent investment for businesses and organizations keen on maintaining optimal environmental conditions effectively.
Top Page Image Contents