Craftsman 580.7622 manual Ring Maintenance, Ring p/n B2386 for the outside of the Male

O-RING MAINTENANCE	1 O-Ring (p/n B2386) for the outside of the Male
Through the normal operation of your pressure washer,	Quick-Connect,
O-Rings,which keep the connections of the hoses and
gun tight and leak-free may become worn or damaged.	0
Provided with your pressure washer is an O-Ring
Maintenance Kit which provides replacement O-Rings,
Rubber Washer and Quick Connect filter.
Parts in the O-Ring Kit Include:
- 2 O-Rings (pin 97837) for each end of the nozzle
extension,
•	1 Water Inlet Screen (p/n 132384)for the Female
	Quick-Connect,

=2 O-Rings (pin B2264) for the ends of the high pres- sure hose.

1 o-ring (p!n B2688) for the connection end of the .....

rotating brush.

/O-Ring

Note: The above two O-Rings are close in size. Please match carefully to assure proper O-Ring usage.

. 1 Rubber Washer (pin B2385) for the inside of the Male Quick-Connect.

To remove a worn or damaged O-Ring:

o Use a small flathead screwdriver to get underneath the O-Ring and pry it off.

]4