Clean and Replace Spark Plug

• Reinstalltheoilfill caporplugandtightensecurely.	Do not clean engine with a forceful spray of water
	because water could contaminate fuel system. With
	a brush or cloth clean finger guard after every use to
	prevent engine damage caused by overheating.

Service Air Cleaner

NOTE: Do net use petroleum solvents, e.g., kerosene, which will cause the cartridge to deteriorate. Do not use pressurized air to clean cartridge. Pressurized air can damage the cartridge.

To service air cleaner follow these steps:

1.Unscrew cover screws. Remove cover and air cleaner assembly.

2.Remove cartifidge from cover, then retainer (if equipped) and pre-cleaner.

To service pre-cleaner, wash in liquid detergent and water. Squeeze dry in a clean cloth. Saturate in engine oil. Squeeze in clean, absorbent cloth to remove all excess oil. Replace if very dirty or damaged.

To service cartridge, clean by tapping gently on a flat surface. Do not oil cartridge. Replace if dirty or dam- aged,

NOTE: Do not use petroleum solvents, e.g., kerosene, which will cause the cartridge to deteriorate. Do not use pressurized airto clean cartridge. Pressurized air can damage the cartiridge.

3.Reassemble pre-cleaner or retainer (if equipped.) Place in cover with pre-cleaner mesh side toward cartridge. Place cartridge in retainer in cover.

4.Push cover and air cleaner assembly squarely onto base (tabs must be in slots, if equipped) and hold firmly. Tighten cover screws securely.

Keep engine and parts clean!

Before running engine, clean muffler area to remove all combustible debris.

CLEAN

Change the spark plug every 100 hours of operation or once each year, whichever comes first. This will help

your engine to start easier and run better,

,030" (0.76 MM)

WIRE GAGE

RESISTOR

• Reinstalltheoilfill caporplugandtightensecurely.

Keep engine and parts clean!

Clean and Replace Spark Plug