Delta DTH2450 instruction manual Starting, Shutting Down

Page 10

STARTING

Prior to starting, refer to your engine manual for proper starting procedure.

1.In a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a pump octane rating of 86 or higher. Do not overfill. Wipe up spilled fuel before starting the engine. Refer to Engine Owners Manual for correct procedure.

2.Check engine oil level. See Engine Owners Manual for correct procedure. NOTE: There will be a slight amount of oil in the engine from factory testing.

3.Verify the filter

screen is in water

Filter Screen

 

inlet of pump.

 

NOTE: Cone side

 

faces out.

 

4.Connect water source to pump inlet.

NOTE: Water source must provide a minimum of 5 gallons per minute at 20 PSI.

5.Connect high pressure hose to pump outlet.

Water

Source

High Pressure Hose

6.If applying a chemical or cleaning solution, see How To Apply Chemicals/Cleaning Solvents instructions in this section.

7.Turn water source on. NOTE: Failure to do so could cause damage to the pump.

8.Start engine. See Engine Owners Manual for correct procedure. NOTE: When engine rope is pulled, pressure starts building in the gun. If the engine does not start after two pulls, pull the gun trigger to relieve this pressure.

9.Depress trigger on gun to start water flow. NOTE: Stand on a stable surface and grip gun/spray wand firmly with both hands. Expect the gun to kick when triggered.

10.Release trigger to stop water flow.

11.Adjust nozzle spray for the task being performed. See How To Use Wand instructions in this section.

SHUTTING DOWN

1.After each use, if you have applied chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. NOTE: Failure to do so could cause damage to the pump.

2.Turn engine off. See Engine Owner’s Manual. NOTE: NEVER turn the water off with the engine running.

3.Turn water source off.

4.Pull trigger on spray gun to relieve any water pressure in hose or spray gun.

5.See Storage section in this manual for proper storage procedures.

A00521

10- ENG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Structioin N M Anual Important Safety Instructions Consumer Safety InformationRisk of Explosion or Fire Risk to Breathing Risk of Fluid InjectionRisk of Electrical Shock Risk of Chemical BurnRisk of HOT Surfaces Risk of Unsafe Operation Risk of Injury from SprayCarton Contents Assembly InstructionsBasic Elements of AN Engine Operating InstructionsBasic Elements of a Pressure Washer Pressure Washer TerminologyPressure Washer Pressure AdjustmentsRead and Understand ALL Warnings Before Starting Unit HOW to Apply Chemicals and Cleaning Solvents HOW to USE Spray WandStarting Shutting DownHOW to Clean the Water Inlet Filter MaintenanceNozzle Cleaning Engine PumpEngine StoragePressure Washer Problem Trouble Shooting GuideCausecorrection Problem Cause Correction ChemicalsENG A00521 Warranty

DTH2450 specifications

The Delta DTH2450 is a cutting-edge hammer drill known for its robust performance and versatility, making it a popular choice among both professionals and enthusiasts in the construction and DIY sectors. This model incorporates advanced engineering and technologies that elevate its efficiency and usability, ensuring it meets the demands of various tasks.

One of the standout features of the Delta DTH2450 is its powerful motor, which delivers a substantial amount of torque. This motor enables the drill to perform a wide range of applications, from heavy-duty drilling in concrete to more delicate tasks in wood and metal. The hammer drill function allows for effective penetration into hard materials, making it ideal for anchoring, drilling holes for rebar, or installing fixtures.

The DTH2450 boasts a variable speed control, allowing users to adjust the speed according to the specific material being worked on. This feature enhances its versatility as it can cater to different materials and project requirements. Additionally, the drill is equipped with a two-speed gearbox, which further optimizes its capabilities by providing options for high speed or high torque, depending on the task at hand.

Another notable characteristic of the Delta DTH2450 is its ergonomic design. The lightweight construction combined with an optimally designed handle ensures a comfortable grip while reducing user fatigue during extended use. This design is complemented by a built-in vibration reduction system, which minimizes the impact felt by the user, leading to improved control and precision.

Safety features are also a priority with the Delta DTH2450. It includes a safety clutch that prevents the drill from jamming during operation, protecting both the user and the tool. Moreover, the model features a robust construction with high-quality materials, ensuring durability and longevity in demanding work environments.

In terms of connectivity, the Delta DTH2450 is compatible with a range of accessories and attachments, expanding its functionality even further. Whether you need to switch to different drill bits or use it with various attachments for specific tasks, this drill is designed to adapt.

Overall, the Delta DTH2450 is a powerful, versatile, and user-friendly hammer drill, making it an excellent addition to any tool collection. Its combination of advanced features, ergonomic design, and safety functions positions it as a top choice for anyone looking to complete a variety of drilling tasks effectively.
Top Page Image Contents