Delta DTH2450 instruction manual Storage, Engine, Pressure Washer

Page 12

STORAGE

ENGINE

Consult the Engine Owners Manual for the manufacturer's recommendations for storage.

5.Pull engine starter rope slowly several times until antifreeze comes out of high pressure hose connection of pump.

6.Remove garden hose from water

PUMP

The manufacturer recommends using a pump protector/winterizer when storing the unit for more than 30 days and/or when freezing temperatures are expected. If a pump protector/winterizer is not available, *RV antifreeze needs to be run through the pump as outlined in the steps below.

NOTE: Using a pump protector/winterizer or *RV antifreeze is to provide proper lubrication to the internal seals of the pump regardless of temperature or environment.

1.Obtain a funnel, six ounces of *RV antifreeze, and 16 - 36 inches of garden hose with a male hose connector attached to one end.

Use only RV antifreeze. Any other

antifreeze is corrosive and can damage pump.

2.Disconnect spark plug wire.

3.Connect length of garden hose to water inlet of pump.

4.Add *RV antifreeze to hose as shown.

inlet of pump.

7.Reconnect spark plug wire.

*Windshield washer fluid may also be used

PRESSURE WASHER

1.Drain all water from high pressure hose, coil it, and store it in cradle of the pressure washer handle.

2.Drain all water from spray gun and wand by holding spray gun in a vertical position with nozzle end pointing down and squeezing trigger. Store in gun holder.

3.Store chemical hose so it is protected from damage.

A00521

12- ENG

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Structioin N M Anual Consumer Safety Information Important Safety InstructionsRisk of Explosion or Fire Risk to Breathing Risk of Fluid InjectionRisk of Chemical Burn Risk of Electrical ShockRisk of HOT Surfaces Risk of Unsafe Operation Risk of Injury from SprayCarton Contents Assembly InstructionsOperating Instructions Basic Elements of a Pressure WasherBasic Elements of AN Engine Pressure Washer TerminologyPressure Adjustments Pressure WasherRead and Understand ALL Warnings Before Starting Unit HOW to Apply Chemicals and Cleaning Solvents HOW to USE Spray WandStarting Shutting DownMaintenance Nozzle CleaningHOW to Clean the Water Inlet Filter Engine PumpStorage EnginePressure Washer Trouble Shooting Guide ProblemCausecorrection Problem Cause Correction ChemicalsENG A00521 Warranty

DTH2450 specifications

The Delta DTH2450 is a cutting-edge hammer drill known for its robust performance and versatility, making it a popular choice among both professionals and enthusiasts in the construction and DIY sectors. This model incorporates advanced engineering and technologies that elevate its efficiency and usability, ensuring it meets the demands of various tasks.

One of the standout features of the Delta DTH2450 is its powerful motor, which delivers a substantial amount of torque. This motor enables the drill to perform a wide range of applications, from heavy-duty drilling in concrete to more delicate tasks in wood and metal. The hammer drill function allows for effective penetration into hard materials, making it ideal for anchoring, drilling holes for rebar, or installing fixtures.

The DTH2450 boasts a variable speed control, allowing users to adjust the speed according to the specific material being worked on. This feature enhances its versatility as it can cater to different materials and project requirements. Additionally, the drill is equipped with a two-speed gearbox, which further optimizes its capabilities by providing options for high speed or high torque, depending on the task at hand.

Another notable characteristic of the Delta DTH2450 is its ergonomic design. The lightweight construction combined with an optimally designed handle ensures a comfortable grip while reducing user fatigue during extended use. This design is complemented by a built-in vibration reduction system, which minimizes the impact felt by the user, leading to improved control and precision.

Safety features are also a priority with the Delta DTH2450. It includes a safety clutch that prevents the drill from jamming during operation, protecting both the user and the tool. Moreover, the model features a robust construction with high-quality materials, ensuring durability and longevity in demanding work environments.

In terms of connectivity, the Delta DTH2450 is compatible with a range of accessories and attachments, expanding its functionality even further. Whether you need to switch to different drill bits or use it with various attachments for specific tasks, this drill is designed to adapt.

Overall, the Delta DTH2450 is a powerful, versatile, and user-friendly hammer drill, making it an excellent addition to any tool collection. Its combination of advanced features, ergonomic design, and safety functions positions it as a top choice for anyone looking to complete a variety of drilling tasks effectively.
Top Page Image Contents