Delta Guide to Using Your Pressure Washer Spray Wand and Applying Chemicals
Page 9

HOW TO USE SPRAY WAND

Your pressure washer is equipped with a multi-adjustable spray wand with both high and low pressure settings. The high pressure setting is for cleaning and rinsing, the low pressure setting is for applying chemicals or cleaning solutions to surfaces.

When using the high pressure setting, DO NOT allow the jet-like spray to come

in contact with unprotected skin, eyes, or with any pets or animals. Serious injury can occur.

Risk of injection or injury to person. DO

NOT direct discharge stream toward persons.

For high pressure operation, pull back the nozzle of the multi-adjustable

spray wand as shown.

The high pressure spray from your

pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.

HOW TO APPLY CHEMICALS AND CLEANING SOLVENTS

Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.

spray wand as shown.

High

Pressure

To Apply chemicals:

1.Press chemical hose onto barbed fitting located near high pressure hose connection of pump as shown.

Barbed Fitting

The nozzle at the end of the multi- adjustable spray wand can be rotated to change the high pressure spray pattern from a 0º pencil stream to a 40º fan spray, as shown. Markings have been placed on the nozzle to help you select the spray pattern.

40º fan spray

 

0º pencil stream

 

 

 

For low pressure operation, extend the nozzle of the multi-adjustable

Low

Pressure

2.Place other end of chemical hose with filter on it into container holding chemical/cleaning solution. NOTE: For every 7 gallons of water pumped 1 gallon of chemical/cleaning solution will be used.

3.Set multi-adjustable nozzle to low pressure setting. See How To Use Spray Wand instruction in this section.

4.After use of chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. If chemicals remain in the pump it could be damaged. Pumps damaged due to chemicals will not be covered under warranty.

NOTE: Chemicals and soaps will not siphon when spray wand is in the high pressure setting.

9- ENG

A00521

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Structioin N M Anual Consumer Safety Information Important Safety InstructionsRisk of Explosion or Fire Risk of Fluid Injection Risk to BreathingRisk of Chemical Burn Risk of Electrical ShockRisk of HOT Surfaces Risk of Injury from Spray Risk of Unsafe OperationAssembly Instructions Carton ContentsBasic Elements of a Pressure Washer Operating InstructionsBasic Elements of AN Engine Pressure Washer TerminologyPressure Adjustments Pressure WasherRead and Understand ALL Warnings Before Starting Unit HOW to USE Spray Wand HOW to Apply Chemicals and Cleaning SolventsShutting Down StartingNozzle Cleaning MaintenanceHOW to Clean the Water Inlet Filter Engine PumpStorage EnginePressure Washer Trouble Shooting Guide ProblemCausecorrection Chemicals Problem Cause CorrectionENG A00521 Warranty

DTH2450 specifications

The Delta DTH2450 is a cutting-edge hammer drill known for its robust performance and versatility, making it a popular choice among both professionals and enthusiasts in the construction and DIY sectors. This model incorporates advanced engineering and technologies that elevate its efficiency and usability, ensuring it meets the demands of various tasks.

One of the standout features of the Delta DTH2450 is its powerful motor, which delivers a substantial amount of torque. This motor enables the drill to perform a wide range of applications, from heavy-duty drilling in concrete to more delicate tasks in wood and metal. The hammer drill function allows for effective penetration into hard materials, making it ideal for anchoring, drilling holes for rebar, or installing fixtures.

The DTH2450 boasts a variable speed control, allowing users to adjust the speed according to the specific material being worked on. This feature enhances its versatility as it can cater to different materials and project requirements. Additionally, the drill is equipped with a two-speed gearbox, which further optimizes its capabilities by providing options for high speed or high torque, depending on the task at hand.

Another notable characteristic of the Delta DTH2450 is its ergonomic design. The lightweight construction combined with an optimally designed handle ensures a comfortable grip while reducing user fatigue during extended use. This design is complemented by a built-in vibration reduction system, which minimizes the impact felt by the user, leading to improved control and precision.

Safety features are also a priority with the Delta DTH2450. It includes a safety clutch that prevents the drill from jamming during operation, protecting both the user and the tool. Moreover, the model features a robust construction with high-quality materials, ensuring durability and longevity in demanding work environments.

In terms of connectivity, the Delta DTH2450 is compatible with a range of accessories and attachments, expanding its functionality even further. Whether you need to switch to different drill bits or use it with various attachments for specific tasks, this drill is designed to adapt.

Overall, the Delta DTH2450 is a powerful, versatile, and user-friendly hammer drill, making it an excellent addition to any tool collection. Its combination of advanced features, ergonomic design, and safety functions positions it as a top choice for anyone looking to complete a variety of drilling tasks effectively.
Top Page Image Contents