Nilfisk-ALTO 106269015 manual Further information, Warranty, CE Declaration of Conformity

NEPTUNE PE

9 Further information

9.1Recycling the machine Make the old cleaner unusable immediately.

1. Unplug the cleaner and cut the power cord.

The pressure washer contains

9.2 Warranty	Your Nilfisk-ALTO product is
	guaranteed for 12 months from
	date of purchase (purchase re-
	ceipt must be presented) on the
	following conditions:
	• that defects are attributable
	to fl aws or defects in materi-
	als or workmanship. (Usual
	wear and tear as well as mis-
	use are not covered by the
	guarantee).
	• that repairs have not been
	carried out or attempted
	by other than Nilfi sk-ALTO-
	trained service staff.
	• that only original accessories
	have been applied.
	• that the product has not been
	exposed to abuse such as
	knocks, bumps or frost.

valuable materials that should be recycled.

Contact your local waste dispo- sal site. If you have any queries, please contact your local autho- rities or your nearest dealer.

•that the instructions in the manual have been carefully observed.

A warranty repair comprises the replacement of defective parts, but it does not cover freight and packaging charges. Besides we refer to national Sale of Goods Act.

Any illegitimate guarantee repair will be invoiced. (I.e. malfunctions due to causes mentioned in section “7 Trouble shooting” of the instruction manual).

9.3CE Declaration of Conformity

CE Declaration of Conformity

Product:	High Pressure Washer
Type:	NEPTUNE PE/DE
Description:	400 V 3~ 50 Hz - 230 V 1~, 50 Hz - IP X5
The design of the unit corresponds to the	EC Machine Directive	2006/42/EC
following pertinent regulations:	EC Low-voltage Directive	2006/95/EC
	EC EMC Directive	2004/108/EC
Applied harmonised standards:	EN 12100-1 (2004), EN 12100-2 (2004),
	EN 55014-1 (2006), EN 55014-2 (2001)
Applied national standards and technical	IEC 60335-2-79 (2007)
specifications:
	Nilfi sk-ALTO
	Division of Nilfisk-Advance A/S
	Industrivej 1
	DK-9560 Hadsund
Anton Sørensen
General Manager, Technical Operations EAPC	Hadsund, 01.01.2010

18