NEPTUNE PE
added (available from the fuel oil trade).
Filling up the engine with fuel, see the enclosed instructions for the engine.
3.4 Connecting the high
pressure hose
3.5Connecting the water supply
NOTE!
See chapter 9.4 Technical Data for required quantity of water and water pressure.
In the case of poor water quality (sand, etc.), it is recommended that an inlet water filter be in-
1.Connect the high pressure hose quick connector to the high pressure nipple.
1.Attach hose coupling found with Owners Manual to the water supply hose.
2.Rinse the water supply hose briefl y in order to prevent sand an other dirt particles entering into the machine.
3.Attach hose coupling to inlet.
4.Open water supply faucet.
stalled.
Water supply hose should be a reinforced hose and have a minimum inside diameter of
3/4" (19 mm).
6