E

N Troubleshooting (continued)

G

L

I

S

HError Display Messages (continued)

Specifications

General

 

FM Stereo Radio

 

Power supply

: DC 12 V (11 V - 16 V), test

Frequency range

: 87.9 MHz - 107.9 MHz

E N G L I S H

61

DVD/VCD

Display

Possible cause a Possible solution

The disc is dirty.

The disc has scratches.

aEject the disc.

The player will not operate for some reason.

aEject the disc. If the disc is not ejected when you press [u] (eject), unplug the power cord and plug it again. In case the unit is still out of order, consult your dealer.

The disc is upside down.

The player for some reason cannot read the file you are trying to play. (File recorded in an unsupported file system, compression scheme, data format, file name extension, damaged data, etc.)

aEject the disc. Select a file that the player can read. Confirm the type of data recorded on the disc. Create a new disc if necessary.

 

voltage 14.4 V, negative

Usable sensitivity

: 10.2 dBf. (0.9 µV, 75 )

 

ground

50 dB quieting sensitivity

: 15.2 dBf. (1.6 µV, 75 )

Current consumption

: Less than 2.3 A (CD mode,

Frequency response

: 30 Hz - 15 kHz (±3 dB)

 

0.5 W 4-channels)

Alternate channel selectivity : 75 dB

Maximum power output

: 50 W x 4 (at 1 kHz)

Stereo separation

: 35 dB (1 kHz)

 

volume control maximum

Image rejection ratio

: 55 dB

Video Signal system

: NTSC/PAL 1.0 Vp-p 75

IF rejection ratio

: 100 dB

 

RCA pin jack

Signal to noise ratio

: 62 dB

Tone/SQ adjustment range

: SQ Low/Bass: ± 12 dB (at 60

 

 

 

 

Hz, 80 Hz, 100 Hz, 200 Hz)

AM Radio

 

 

SQ Mid: ± 12 dB (at 500 Hz,

 

Frequency range

: 530 kHz - 1 710 kHz

 

1 kHz, 2 kHz, 3 kHz)

Usable sensitivity

: 27 dB/µV (22 µV, S/N 20 dB)

 

SQ High/Treble: ± 12 dB (at

 

 

 

10 kHz, 12 kHz, 15 kHz,

 

Disc Player

 

 

18 kHz)

 

DA converter

: 1 bit DAC System

Speaker impedance

: 4 - 8

Pick-up type

: Astigma 3-beam

Pre-amp output voltage

: 2 V (CD mode, 1 kHz, 0 dB)

Light source

: Semiconductor laser

Subwoofer output voltage

: 2 V

Frequency response

: 20 Hz - 20 kHz (CD)

Pre-amp output impedance

: 200

 

: 20 Hz - 22 kHz (DVD video

Subwoofer output impedance

: 200

 

48 kHz sampling)

Dimensions (W x H x D)

: 178 x 50 x 160 mm

 

: 20 Hz - 44 kHz (DVD video

 

{7x 1 15/16 x 6 5/16}

 

96 kHz sampling)

Weight

: 1.8 kg

Signal to noise ratio

: 95 dB (IHF, A)

 

{3 lbs. 16 oz}

Wow and flutter

: Below measurable limits

62

This disc may not be played in your region.

An attempt was made to play a disc with a region number that was not “1” or “ALL”.

aEject the disc.

Discs played

(1) DVD-Video disc

12 cm {5} single-sided, single-layer/double-layer 12 cm {5} double-sided, single-layer/double-layer 8 cm {3} single-sided, single-layer/double-layer

8 cm {3} double-sided, single-layer/double-layer

Digital audio output

(2)Compact disc (CD-DA, Video CD, CD-R, CD-RW) 12 cm {5} disc

8 cm {3} disc

Disc

Sounds recording format

Optional digital audio output from connector

 

 

 

 

DVD

Dolby Digital

Dolby Digital bitstream (1 - 5.1ch)

 

 

DTS*

DTS bitstream (1 - 5.1ch) (The analog portion is not output.)

 

 

Liner PCM

Liner PCM (2 ch)

 

 

(48 kHz 16/20/24 bit)

(48 kHz sampling/16 bit)

 

 

 

 

Video CD

MPEG 1

MPEG 1 bitstream

 

 

Linear PCM

Linear PCM (2 ch) (44.1 kHz sampling/16 bit)

 

 

 

 

CD

Linear PCM

Linear PCM (2 ch) (44.1 kHz sampling/16 bit)

 

 

DTS*

DTS bitstream (1 - 5.1ch) (The analog portion is not output.)

 

 

 

 

MP3

MP3

Linear PCM (2ch) (32 kHz/44.1 kHz/48 kHz sampling/16 bit)

 

 

 

 

*DTS only works optical outputs.

Above Specifications comply with EIA standards.

Power Output:

18 W RMS x 4 Channels at 4 and 1% THD+N

Signal to Noise Ratio:

85 dBA (reference: 1 W into 4 )

Note:

¡Specifications and design are subject to modification without notice due to improvements.

¡Some figures and illustrations in this manual may be different from your product.

62

63

CQ-D5501U

CQ-D5501U

Page 32
Image 32
Panasonic CQ-D5501U operating instructions Specifications, Error Display Messages