Panasonic CQ-D5501U Select each item Finish the setting, TV Type, TV Display, On-Screen Messages

E

N User Settings (continued)

G

L

IThe following information explains the settings only about the disc player and displayed contents on the screen. S (Only for Remote Control Unit)

H

41 q Display “Main Menu”.	w Select each setting menu.
Press [MENU].	Press one of the numeric buttons from [1] to [8].
	(Example: “6. TV Display”)

E

N

G

L

I

S

H

e Select each item.	r Finish the setting.	42
Press one of the numeric buttons from [1] to [4].	Press [0] (Exit). (The setting is completed.)
(Example: “2. Pan & Scan (4:3)”)	Note:

	<Main Menu>			<Main Menu>
1.	Menu Language	: English	1.	Menu Language	: English
2.	Subtitle Language	: English	2.	Subtitle Language	: English
3.	Audio Language	: English	3.	Audio Language	: English
4.	OSD Language	: English	4.	OSD Language	: English
5.	TV Type	: NTSC	5.	TV Type	: NTSC
6.	TV Display	: WIDE	6.	TV Display	: WIDE
7.	On-Screen Messages	: ON	7.	On-Screen Messages	: ON
8.	D. Range Compression	: OFF	8.	D. Range Compression	: OFF
	0. Exit			0. Exit

<TV Display Mode>

Select TV	1.	WIDE (16:9)
Display Mode	2.	Pan & Scan (4:3)
	3.	Letterbox (4:3)
	4.	Return

¡To apply changes to the setting, be sure to press [0] (Exit) at the end.

¡After the user settings have been changed and entered, the player returns to the start of the disc.

¡When the disc has predetermined language or other settings, the user settings are not reflected.

Note:

¡The Main Menu has been set for this unit. It is not set for any DVD disc.

¡Main menu setting is possible only if the disc source has been selected. (No disc playing)

	POWER	STOP	PAUSE	PLAY
	SOURCE
	SRC
	TRACK / SEARCH
	RETURN	TITLE
	RET	MENU			R
[MENU]				EN	E
				T
	1	2	3	SEL
Numeric buttons	SUBTITLE	AUDIO	ANGLE
	4	5	6
[1] – [9]
	RANDOM	SCAN	REPEAT	VOL
	7	8	9
			TRACK
[0]	OSD	0	GRP	MUTE
		DRC	TITLE / CHAPTER

(Finish the setting.)

CAR AV

5. TV Type

TV standard format setting

Default: NTSC

Note:

Setting should be made to match the format of the con- nected monitor. Select NTSC if connections are made possible for both NTSC and PAL. If you select PAL, a picture may be partly omitted.

6. TV Display

Display aspect setting

Default: WIDE

7. On-Screen Messages

This is to select On-screen Display messages which will be displayed when On-screen Display is turned off by pressing [OSD] (a Page 31).

Default: ON

8. D.Range Compression

By compressing the range of the playback level (the dynamic range), it is possible to maintain the impact of audio even at low volumes.

This function only works with Dolby Digital encoded material.

Default: OFF

1. NTSC	The unit transmits the NTSC formatted signal in either case, playing an NTSC formatted video or a
	PAL formatted video.
2. PAL	The unit transmits the PAL formatted signal in either case, playing an NTSC formatted video or a
	PAL formatted video.
3. Multi	The unit transmits the same video signal as the output of playing video software.
	Note:
	¡If the connected monitor cannot automatically select between NTSC and PAL according to the
	video signal of the disc to be reproduced, images on the screen may be distorted. Select NTSC
	or PAL at the monitor side depending to the disc to be reproduced.

4.Return The display returns to “Main Menu”.

1. WIDE (16:9) Plays in Wide mode when a wide-screen monitor is connected.

2.Pan & Scan (4:3) Plays in Pan & Scan mode when a conventional monitor is connected.

3.Letterbox (4:3) Plays in Letterbox mode when a conventional monitor is connected.

4. Return The display returns to “Main Menu”.

Note:

¡If “Pan & Scan” or “Letterbox” is already set in the software, this setting is ignored.

1. ON	When power is turned on, On-Screen Display message such as “Play” and “Pause”
	will be displayed on the screen for 5 seconds.
2. OFF	When power is turned on, On-Screen Display messages such as “Play” and
	“Pause” will not be displayed on the screen.

3.Return The display returns to “Main Menu”.

1. Minimum	Most compressed mode: TV	Note:
	broadcasts, etc	¡ When it is difficult to hear comparatively small
2. Standard	Mode recommended by software	sound (such as movie dialogue), setting “Minimum”
	creators for listening at low volumes.	will make those sounds easier to hear.
3. OFF	Does not compress the dynamic
	range.

4.Return The display returns to “Main Menu”.

42

43

CQ-D5501U CQ-D5501U