Campbell Hausfeld IN468001AV specifications Important Safety Instructions, Operation

Page 2

Operating Instructions and Parts List

PW1350

 

 

! IMPORTANT !

This pressure washer is equipped with a microswitch sensitive to water flow. This Instant Start/Stop switch (ISS) senses water flow in the pump. When the trigger is released, water stops flowing through the pump. The ISS then automatically turns the motor off to protect pump from overheating.

Operation

1.Pull trigger on gun.

2.Turn the “ON/OFF” switch to “ON”.

3.Release trigger. The pressure washer motor will stop running.

4.To spray again, pull trigger and motor and pump will restart.

Note: Occasionally the motor may run for a short time to bring fresh, cool water into the pump even

if trigger is released. This is part of normal operation and will not damage the unit.

Always turn the “ON/OFF”

switch to “OFF” then trigger gun to release hose pressure before unplugging power cord.

Risk of equipment

damage. Always make sure the “ON/OFF” switch on the unit is “OFF” and unit is unplugged prior to storage.

Risk of Injection. Unit

will start spraying when trigger is squeezed if ON/OFF switch is in “ON” position. Always point gun in safe direction.

Call 1-800-330-0712 for Technical Service

Important Safety

Instructions

Save These Instructions

When using this product, basic precautions should always be followed, including the following:

1.Read all instructions before using the product.

2.ALWAYS disconnect power before disassembling or repairing the unit.

3.Follow all safety codes as well as the Occupational Safety and Health Act (OSHA).

4.Ensure safety devices are operating properly before each use. DO NOT remove or modify any part of the gun or unit.

5.Know how to stop this product and bleed pressure quickly. Be thoroughly familiar with the controls.

6.Stay alert – watch what you are doing.

7.Do not operate the product when fatigued or under the influence of alcohol or drugs.

8.Keep operation area clear of all persons.

9.Do not overreach or stand on unstable support. Keep good footing and balance at all times.

10.Follow the maintenance instructions specified in the manual.

11.This product is provided with a ground fault circuit interrupter, GFCI, be sure to inspect cord and GFCI prior to use. Any repair or replacement of the power cord must be performed by a qualified (licensed or certified) electrical technician.

12.Never use an extension cord with this product.

www.chpower.com2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Specifications Safety GuidelinesImportant Safety Instructions OperationRisk of explosion Risk of electrocutionRisk of injection or sever injury Servicing of a Double Insulated Appliance Double Insulated symbolDo not spray electrical Apparatus and wiring Equipment damagePower Cord Garden Hose Connection InstructionsSystem Connection How to Avoic Damaging SurfacesNozzle Cleaning Instruction Nozzle Cleaning Instructions DetergentsOperation End of operationFor Replacement Parts or Technical Assistance, Call Limited Warranty What is not Covered Under this WarrantyRemarque ou Avis SpécificationsDirectives de Sécurité Importantes Instructions de Sécurité FonctionnementRisque d’éxplosion Risque d’électrocutionRisque d’injection ou de blessure Grave Entretien d’un Appareil à Double Isolation Symbole de double isolementImportantes Instructions de Sécurité Suite Dégâts ’équipement Entretien d’un Appareil à Double Isolation SuiteNe pas pulvériser les Appareils électriques ni le câblage Branchement du Système Branchement du Tuyau d’ArrosageCordon Comment Éviter D’Endommager Les Surfaces Mode d’emploiBranchement du Système Suite Marche on Arrêt OFFInstructions De Nettoyage De L’Embout Fonctionnement Conclusion DU TravailManuel d’instructions et pièces de rechange PW1350 Fr-10 Pour Pièces de Rechange ou assistance technique, Appelez Garantie Limitée LA Présente Garantie NE Couvre PASEspecificaciones Medidas de SeguridadInstructions de Seguridad Importantes Guarde estas instruccionesRiesgo de explosión Riesgo de electrocuciónRiesgo de inyección o lesiones graves Sp-4 No rocíe artefactos ni Alambres eléctricos Forma de Reparar un Aparato de Doble AislamientoSímbolo de aislamiento doble Conexión de la Manguera de Jardín Figura 2 Conexión de la Manguera de JardínCable de Corriente Eléctrica Conexión del SistemaInstrucciones de uso Cómo Evitar Dañar Las SuperficiesInstrucciones Para Limpiar La Boquilla Detergentes OperaciónNotas Sp-11 Garantía Limitada QUÉ no Está Cubierto POR Esta GarantíaNotas Notas

IN468001AV specifications

The Campbell Hausfeld IN468001AV is a versatile and powerful air compressor designed to meet the demands of both professionals and DIY enthusiasts. This unit features a robust construction that ensures longevity and reliability, making it an essential tool for various applications, such as inflating tires, powering pneumatic tools, and completing a wide range of home improvement projects.

One of the most notable features of the IN468001AV is its powerful 1.0 HP motor, which provides a substantial amount of airflow. With a maximum pressure rating of 125 psi, this air compressor is capable of delivering an impressive 3.5 CFM (cubic feet per minute) at 90 psi, making it suitable for running multiple tools without a hitch. This capability allows users to tackle demanding tasks efficiently and effectively.

The unit is built with a 4-gallon vertical air tank, which is designed for easy portability while still maintaining a substantial reserve of compressed air. The vertical design minimizes the footprint of the unit, making it ideal for small workspaces or garages where space is at a premium. Additionally, the tank is made from high-quality steel, ensuring durability and resistance to corrosion.

For user convenience, the IN468001AV comes equipped with a quick-connect coupler that allows for fast and easy connection to air hoses and tools. This feature not only streamlines setup but also enhances productivity by reducing downtime. The unit is also designed with a built-in pressure gauge that provides real-time pressure readings, allowing users to monitor and adjust pressure settings as needed for their specific applications.

Another highlight of the Campbell Hausfeld IN468001AV is its low noise level, making it suitable for residential areas or indoor use. It operates at a noise level of around 68 decibels, which is comparatively quieter than many other air compressors on the market. This feature enhances user comfort during extended operation periods.

In terms of safety and maintenance, the air compressor is designed with a thermal overload protection system that prevents the motor from overheating, thereby prolonging the lifespan of the unit. Its oil-free pump design means users do not have to worry about regular oil changes or maintenance, making it an ideal choice for those seeking a low-maintenance solution.

Overall, the Campbell Hausfeld IN468001AV is a well-rounded air compressor featuring outstanding performance, portability, and ease of use, making it a reliable choice for both novice and experienced users alike.
Top Page Image Contents