Excell Precision VR2300 specs

HOW TO APPLY CHEMICALS AND CLEANING SOLVENTS

Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.

To apply chemicals:

1.Press chemical hose onto barbed fitting located near high pressure hose connection of pump as shown.

2.Place other end of chemical hose with filter on it into container holding chemical/cleaning solution. NOTE: The chemical/water ratio is 7:1, for every 7 gallons of water pumped, 1 gallon of chemical/cleaning solution will be used.

3.Set multi-adjustable nozzle to low pressure setting. See How To Use Wand paragraph in this section.

Barbed Fitting

4.After use of chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. If chemicals remain in the pump it could be damaged. Pumps damaged due to chemicals will not be covered under warranty.

NOTE: Chemicals and soapS will not siphon when wand is in the high pressure setting.

READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT

When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin,

eyes, or with any pets or animals. Serious injury can occur.

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

NEVER fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

NEVER fill fuel tank completely. Fill tank to 1/2" below bottom of filler neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

NEVER run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

DO NOT let hoses come in contact with very hot engine muffler during or immediately after use of your pressure washer. Damage to hoses from contact with hot engine surfaces will NOT be covered by warranty.

NEVER pull water supply hose to move pressure washer. This could damage hose and/or pump inlet.

DO NOT use hot water, use cold water only.

NEVER turn water supply off while pressure washer engine is running or damage to pump will result.

DO NOT stop spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.

If you do not understand these precautions, please call 1-800-888-2468 to speak to a service representative for further instructions.

13- ENG

D27935

VR2300 specifications

The Excell Precision VR2300 is a cutting-edge solution designed for precision machining, embodying advanced technologies and innovative features that set it apart in the competitive manufacturing landscape. Engineered for versatility and accuracy, the VR2300 is particularly well-suited for industries such as aerospace, automotive, and medical device manufacturing, where precision is paramount.

One of the standout features of the VR2300 is its robust structure, designed to withstand heavy workflows while maintaining dimensional stability. The machine is constructed with high-grade cast iron, which provides exceptional rigidity and dampens vibrations, ensuring that even the most intricate machining tasks yield high-quality results.

The VR2300 is equipped with a powerful spindle that operates at high speeds, allowing for efficient material removal and superior finish quality. With a speed range of 10,000 to 20,000 RPM, this machine is capable of handling a wide variety of materials, from aluminum alloys to hardened steels. The spindle is paired with an advanced cooling system, which maintains optimal operating temperatures, thus enhancing tool life and machining efficiency.

Another noteworthy technology featured in the VR2300 is its state-of-the-art CNC control system. The intuitive interface allows operators to program complex machining tasks with ease, minimizing setup times and maximizing productivity. The system also supports advanced features such as 3D simulation and predictive maintenance alerts, ensuring that potential issues are addressed before they cause downtime.

The VR2300 boasts an impressive axis travel range, which provides flexibility for a diverse range of applications. Its high-precision linear guides and ball screws deliver exceptional accuracy and repeatability, critical for producing intricate components. Furthermore, the machine comes equipped with an automatic tool changer (ATC), streamlining operations and reducing manual intervention.

Safety and efficiency are central to the design of the VR2300. It incorporates multiple safety features, including emergency stop buttons and protective enclosures, ensuring operator protection without compromising accessibility. Energy-efficient components also contribute to reduced power consumption, making the VR2300 an environmentally friendly choice.

Overall, the Excell Precision VR2300 is a powerful, versatile machining tool that combines robust construction, cutting-edge technology, and precision engineering, making it an ideal solution for manufacturers looking to enhance their capabilities and achieve superior results in their machining operations.