Briggs & Stratton 020251 owner manual Assembly, Preparing Pressure Washer for USE, Carton Contents

Page 6

Section Assembly

3

ASSEMBLY

IMPORTANT: Read entire owner’s manual before you attempt to assemble or operate your new pressure washer.

Remove Pressure Washer From Carton

1.Remove the parts bag, accessories, and inserts included with pressure washer.

2.Slice two corners at the end of carton from top to bottom so the panel can be folded down flat.

3.Remove pressure washer from carton.

Carton Contents

Items in the carton include:

•Main Unit

•Safety Goggles

•Handle with Chemical Reservoir Assembly

•High Pressure Hose

•Spray Gun

•Nozzle Extension with Quick Connect Fitting

•Plastic Accessory Tray

•Oil Bottle

•Parts Bag (which includes the following):

•Owner’s Manual

•Engine Manual

•Owner’s Registration Card

•Bag containing 4 multi–colored ProjectPro™ Nozzles

•Maintenance Kit

•Handle/Tray Fastening Hardware Kit (which includes):

•Carriage Bolts (2)

•“L” Bolt

•Plastic Knobs (3)

•Tree Clips (4)

If any of the above parts are missing or damaged, call the pressure washer helpline at 1–800–743–4115.

PREPARING PRESSURE WASHER FOR USE

If you have any problems with the assembly of your pressure washer or if parts are missing or damaged, call the pressure washer helpline at 1-800-743-4115.

To prepare your pressure washer for operation, you will need to perform these tasks:

1.Fill out and send in registration card.

2.Attach handle with chemical reservoir assembly to main unit.

3.Connect chemical hose to pump.

4.Add oil to engine crankcase.

5.Add fuel to fuel tank.

6.Connect high pressure hose to spray gun and pump.

7.Connect water supply to pump.

8.Attach nozzle extension to spray gun.

9.Select/attach quick connect ProjectPro™ nozzle to nozzle extension.

Attach Handle and Accessory Tray

1.Place handle assembly onto handle supports connected to main unit. Make sure holes in handle align with holes on handle supports (Figure 1).

Figure 1 — Attach Handle to Base

Handle

Align Holes

Handle

Supports

NOTE: It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the handle supports.

6

Image 6

Contents 020251 2900 PSI Table of Contents Safety RulesEquipment Description When Adding Fuel Operate pressure washer only outdoorsHigh pressure spray may damage fragile items including glass Know Your Pressure Washer Features and Controls SectionSafety Goggles not shown Always use the enclosed Nozzle Extension with Quick Connect Allows you toAttach Handle and Accessory Tray AssemblyCarton Contents Preparing Pressure Washer for USEAssembly Attach Chemical Hose to PumpAdd Engine Oil and Fuel Connect high pressure hose here Checklist Before Starting EngineConnect Hose and Water Supply to Pump Not use ifPressure Washer Location HOW to USE Pressure WasherOperation Section To Start Your Pressure WasherEngage trigger lock on spray gun when not in use How to Stop Your Pressure WasherHow to Use Accessory Tray OperationHow to Use ProjectPro Nozzle System Follow these instructions to change ProjectPro nozzlesEngage trigger lock on spray gun Cleaning and Applying Detergent To apply detergent follow these stepsOn Position Off Position Thermal Relief Pressure Washer RinsingAutomatic Cool Down System If you run the engine on your pressure washer forGeneral Maintenance Recommendations Section MaintenanceSpecifications Pressure Washer MaintenanceRing Maintenance MaintenanceNozzle Maintenance Use wire hereChanging Pump Oil Engine MaintenancePump Maintenance Change pump oil as followsStoring the Engine StoragePreparing Unit for Storage Protecting the PumpTroubleshooting TroubleshootingProblem Cause Correction Commercial Use Consumer Use YearsYears or DaysDescripción DEL Equipo Reglas de SeguridadConserve Estas Instrucciones Tabla DE Contenidos Instrucciones DE SeguridadSección 1 Reglas de Seguridad Cuando Añada CombustiblePrecaución Características y Controles Conozca SU Maquina Lavadora DE PresionMontaje MontajePreparando EL Lavador a Presión Para SU USO Agregar Aceite al Motor y Gasolina Sección 3 MontajeMontaje de Manguera de Productos Químicos a Bomba Coloque la lavadora a presión sobre una superficie niveladaDeposite la gasolina adecuada en el tanque del combustible Conecte la Manguera y el Suministro de Agua a la BombaLista de Revision Previa al Arranque del Motor Proporcione el suministro de agua adecuadoUbicación del Lavadora a Presión OperaciónCómo Usar SU Lavadora a Presión Cómo Darle Arranque a su Lavadora a PresiónSección 4 Operación Cómo Detener su Máquina Lavadora a PresiónUtilización de la Bandeja de Accesorios La Presión Alta Cómo Usar el Sistema de Boquillas ProjectProLa Presión Baja Coloque el pestillo de seguridad de la pistola de rociadoLimpieza y Aplicación del Químico On Posición Off PosiciónDetergentes caseros podrían dañar la bomba Enjuage de la Máquina Lavadora a Presión Sistema de Enfriamiento Automático Alivio TérmicoColoque el cerrojo de seguridad a la pistola de rociado Recomendaciones Generales MantenimientoEspecificaciones Antes de Cada UsoMantenimiento de los Anillos O Sección 5 MantenimientoMantenimiento de la Boquilla Mantenimiento de la BombaPreparando LA Unidad Para SU Almacenamiento Sección 5 y 6 Mantenimiento y AlmacenamientoMantenimiento DEL Motor Almacenando EL MotorDiagnosticos de Averías Reparacion DE DañosGarantía Limitada