Rheem RS47-21BP, RS80-42BP instruction

Collector Extrusion & Strap Installation Detail - Tile Roof

!CAUTION: Straps must be attached directly onto the rafters or trussed not less than 39” apart and not more than 63" apart.

!CAUTION: The Extrusion must slope 1/2” per collector from horizontal (hot pipe side to be higher) for the system to work correctly.

Collector Extrusion and Strap Installation Detail - Metal Roof

!CAUTION: Ensure the weatherproof seal is restored.

Frame Installation

!CAUTION: For all frame installations, the tank-end support points must be located over the load-bearing wall or a reinforced roof area.

!CAUTION: Ensure the weatherproof seal is restored.

The frame is attached to two wood or Unistrut runners and installed over rafters or trusses, bearing wall or reinforced roof area. Fixed pitch frame assemblies are used in reverse and side pitch installations, whereas variable pitch frame assemblies are used for shallow pitch or flat roof installations.

1.Remove roofing if necessary where runners will be installed to provide solid base for the frame.

2.Install two off 2" x 4" x 8'4” redwood, treated-wood or Unistrut runners;

•Mark supporting rafter or truss locations,

•Place tank-end of runners over load-bearing wall,

•Cut runners to straddle the two closest rafters diagonally,

•Angle runners under support points to permit rainwater drainage.

RS47-21BP, RS80-42BP specifications

The Rheem RS47-21BP and RS80-42BP are innovative water heater solutions designed to meet the diverse needs of modern households. These models incorporate advanced technologies to enhance efficiency, performance, and user convenience.

The Rheem RS47-21BP is a 47-gallon heat pump water heater that provides a strong balance between performance and energy savings. One of its standout features is its impressive energy efficiency rating. This model utilizes heat pump technology harnessing ambient heat from the air to heat water, drastically reducing energy consumption compared to traditional electric water heaters. This results in lower utility bills and a smaller carbon footprint, making it an environmentally conscious choice.

On the other hand, the RS80-42BP is a larger 80-gallon heat pump water heater suitable for families with higher hot water demands. It offers a similar energy-efficient operation as the RS47-21BP but with an increased capacity. This model is perfect for households that require a reliable supply of hot water for multiple simultaneous uses, such as showers, dishwashing, and laundry. The unit's size is designed to cater efficiently to larger families or higher demand scenarios, making it an ideal choice for busy homes.

Both models are equipped with advanced smart technology, allowing the user to monitor and control the water heater remotely through a smartphone application. This feature provides real-time data on water usage and energy consumption, empowering users to manage their hot water needs proactively. Furthermore, the intuitive interface makes it easy to adjust settings, helping households maximize efficiency.

Additionally, Rheem has incorporated protective features in both models, including an intelligent self-diagnostic system that assists in troubleshooting. The LED display offers clear indications of operational status, making maintenance straightforward. Both units come with durable construction, designed to resist corrosion and prolong their lifespan.

Overall, the Rheem RS47-21BP and RS80-42BP represent the forefront of water heating technology, combining efficiency, smart technology integration, and ample capacity. These water heaters are not only reliable but also contribute significantly to energy savings, catering to both small and large household needs effectively.