Zenoah SRTZ2601F Air cleaner, Spark Plug, Replacement Plug is a NGK CMR7A, Fuel Filter

Page 13

9. Maintenance

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the machine. Con- tact with hot muffler may result in a personal injury.

•Do not modify the trimming mechanism or dismantle the engine.

•When replacing parts please use Zenoah original parts or designated parts.

■Air cleaner

•After every 25 hours of operation, please remove the air cleaner cover and inspect the element. If it is too dirty, wash it carefully in warm water containing a neu- tral detergent, and return it to its original position af- ter drying it thoroughly.

•If the element is distorted or damaged, please replace it with a new one.

a. Element

b. Air cleaner cover

SRTZ2601F

SPARK PLUG

 

 

WARNING

 

•

Do not touch the spark plug with your bare hands

G

 

immediately after operation, as there is the risk of

B

 

burns due to high temperature.

 

•

After every 50 hours of operation, detach the spark

 

 

plug and remove dirt from the electrodes with a wire

 

 

brush or similar.

 

•

The correct electrode gap is 0.6 to 0.7mm.

 

•

When replacing plugs, please use designated items.

 

 

0.6 - 0.7 mm

 

•

REPLACEMENT PLUG IS A NGK CMR7A.

 

 

9.8 ~ 13.7 N.m.

 

 

TIGHTENING TORQUE: (100 ~ 140 kgf-cm)

 

IMPORTANT

•If the air cleaner element is blocked, the efficiency of the engine will be reduced. In addition, the engine interior will suffer abnormal wear if operated without the element or if continually operated with a distorted or damaged element fitted.

FUEL FILTER

•After every 25 hours of operation, empty the fuel tank, detach the fuel filter from the tank, and remove all dirt. If the filter is too clogged, please replace it with a new one.

IMPORTANT

•If too much fuel is absorbed or poor quality oil is used, the spark plug electrodes become dirty, making the engine harder to start.

•Note that using any spark plug other than those des- ignated may result in the engine failing to operate properly or in the engine becoming overheated and damaged.

•To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.

Fuel filter

IMPORTANT

•If the fuel filter is clogged, the engine speed may be limited or speed fluctuations may occur.

•If the engine is operated without a fuel filter, dirt will accumulate in the carburetor and cause it to malfunc- tion.

GB-13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents GB-1 SRTZ2601F25.4 cm 94 dBA 110 dBA Wear head, eye and ear protectionE13*97/68SH2G3*2002/88*0094*03 GB-2Parts location ContentsSymbols on the machine SpecificationSRTZ2601F Working Condition For safe operationWorking Circumstance Working PlanBefore Starting Engine Using the ProductStarting the Engine If Someone Comes MaintenanceHandling Fuel TransportationSet up Fuel Adjusting Idling Speed Adjusting Throttle CableOperation Starting EngineGB-11 Maintenance Replacement Plug is a NGK CMR7A Air cleanerSpark Plug Fuel FilterDisposal StorageLimited warranty Troubleshooting guideCase 1. Starting failure Check Probable Causes Action

SRTZ2601F specifications

The Zenoah SRTZ2601F is a high-performance, professional-grade brushcutter designed for demanding landscaping tasks. Known for its robust construction and innovative technologies, this model is a favorite among landscape professionals and enthusiasts alike.

One of the standout features of the SRTZ2601F is its powerful 25.4cc two-stroke engine. This engine is engineered for both performance and fuel efficiency, delivering impressive torque and speed while minimizing emissions. The power-to-weight ratio of the SRTZ2601F is optimized, providing excellent maneuverability, which is essential for tasks in tight spaces or thick vegetation.

The unit is equipped with advanced starting technology, including a digital ignition system that ensures easy starts with minimal effort, even in cold weather. The anti-vibration system incorporated into the design significantly reduces operator fatigue, allowing for prolonged use without discomfort. This system absorbs the vibrations generated by the engine, providing a smoother experience during operation.

The cutting attachment of the Zenoah SRTZ2601F features a dual cutting line head that allows for efficient trimming and edging. The head is designed for quick line replacement, reducing downtime during work. Additionally, users have the option to switch out the cutting head for blades, making the tool versatile for different types of vegetation.

The ergonomic design of the brushcutter promotes comfortable handling. The adjustable handle is easily configurable to suit the user's height and preferences, enhancing control and precision while in use. The lightweight design, coupled with a well-balanced construction, ensures that even extended periods of work become less tiring.

In terms of durability, the SRTZ2601F is built with high-quality materials that can withstand the rigors of daily use. Its rugged casing protects the internal components from impacts and environmental conditions, ensuring longevity and reliability.

Furthermore, this model supports various accessories, allowing for customization based on individual needs. Whether dealing with tough brush, trim work, or heavy-duty clearing tasks, the Zenoah SRTZ2601F is designed to meet the challenges head-on, making it an indispensable tool for anyone serious about landscaping.

Overall, the Zenoah SRTZ2601F combines power, efficiency, and user-friendly features, making it a top choice for both professional landscapers and home gardening enthusiasts looking for a reliable brushcutter.
Top Page Image Contents