Zenoah SRTZ2601F owner manual Parts location, Contents

SRTZ2601F

SAFETY FIRST

Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

WARNINGS IN THE MANUAL

WARNING

This mark indicates instructions, which must be followed in or- der to prevent accidents, which could lead to serious bodily in- jury or death.

IMPORTANT

This mark indicates instructions, which must be followed, or it leads to mechanical failure, breakdown, or damage.

NOTE

This mark indicates hints or directions useful in the use of the product.

Contents
1.	Parts location	3
2.	Specifications	4	G
3.	Warning labels on the machine	4	B
4.	Symbols on the machine	4
5.	For safe operation	5
6.	Set up	8
7.	Fuel	9
8.	Operation	10
9.	Maintenance	12
10.	Storage	14
11.	Disposal	14
12.	Troubleshooting guide	15

Information

This machine is equipped with an Overload Cancellation Mechanism.

When the cutting blades have got into metal wires or twigs difficult to cut, the mechanism works as a shock absorber, and protects the gears and the blades from severe reaction which could give damage to those parts.

When the blades are frequently caught by twigs, please check the following points:

1.Size of the twigs --> Never try to cut twigs thicker than 5 mm.

2.Condition of the blade edges --> Replace the worn-out blades. Thank you for choosing our product.

1.Parts location

(1)Loop handle

(2)Sholder strap hanger

(3)Ignition switch

(4)Throttle cable

(5)	Throttle lever	12
(6)	Drive shaft housing	11		3
(7)	Spark arrester
			7	1
(8)	Starter knob	10		2
(9)	Fuel tank
(10)	Primer pump			4
(11)	Choke lever
(12)	Air cleaner cover	9	8	5
(13)	Blade		14
(14)	Gear case

6

13

GB-3