Zenoah SRTZ2601F owner manual If Someone Comes, Maintenance, Handling Fuel, Transportation

Page 7

SRTZ2601F

5. For safe operation

•IF SOMEONE COMES

1.Guard against hazardous situa- tions at all times. Warn adults to keep pets and children away from the area. Be careful if you are ap- proached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, al- ways be sure to turn off the en- gine before turning around.

MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the en- gine before performing any main- tenance or checking procedures.

WARNING

The metallic parts reach high tem- peratures immediately after stop- ping the engine.

3.When replacing the cutting at- tachment or any other part, or when replacing the oil or any lu- bricant, always be sure to use only ZENOAH products or products which have been cer- tified by ZENOAH for use with the ZENOAH product.

4.In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest ZENOAH authorized servicing dealer for assistance.

5.Do not use any accessory or at- tachment other than those bear- ing the ZENOAH mark and rec- ommended for the unit.

6.Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product be- coming damaged during opera- tion or the product becoming un- able to operate properly.

HANDLING FUEL

 

1. The engine of the ZENOAH prod-

 

uct is designed to run on a mixed

 

fuel, which contains highly flam-

 

mable gasoline. Never store cans

G

of fuel or refill the tank of the unit

B

in any place where there is a

 

boiler, stove, wood fire, electrical

 

sparks, welding sparks, or any

 

other source of heat or fire which

 

might ignite the fuel.

 

2.Never smoke while operating the unit or refilling its fuel tank.

3.When refilling the tank, always

turn off the engine and allow it to cool down. Take a careful look around to make sure that there are no sparks or open flames any- where nearby before refueling.

4.Wipe spilled fuel completely us- ing a dry rag if any fuel spillage occurs during refueling.

5.After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the unit to a spot 3 m or more away from where it was refueled before turning on the en- gine.

TRANSPORTATION

1. When hand-carrying the product, cover over the cutting part if nec- essary, lift up the product and carry it paying attention to the blade.

2. Never transport the product over rough roads over long distances by vehicle without removing all fuel from the fuel tank. If doing so, fuel might leak from the tank dur- ing transport.

GB-7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents GB-1 SRTZ2601FGB-2 Wear head, eye and ear protection25.4 cm 94 dBA 110 dBA E13*97/68SH2G3*2002/88*0094*03Parts location ContentsSymbols on the machine SpecificationSRTZ2601F Working Plan For safe operationWorking Condition Working CircumstanceBefore Starting Engine Using the ProductStarting the Engine Transportation MaintenanceIf Someone Comes Handling FuelSet up Fuel Starting Engine Adjusting Throttle CableAdjusting Idling Speed OperationGB-11 Maintenance Fuel Filter Air cleanerReplacement Plug is a NGK CMR7A Spark PlugDisposal StorageCheck Probable Causes Action Troubleshooting guideLimited warranty Case 1. Starting failure

SRTZ2601F specifications

The Zenoah SRTZ2601F is a high-performance, professional-grade brushcutter designed for demanding landscaping tasks. Known for its robust construction and innovative technologies, this model is a favorite among landscape professionals and enthusiasts alike.

One of the standout features of the SRTZ2601F is its powerful 25.4cc two-stroke engine. This engine is engineered for both performance and fuel efficiency, delivering impressive torque and speed while minimizing emissions. The power-to-weight ratio of the SRTZ2601F is optimized, providing excellent maneuverability, which is essential for tasks in tight spaces or thick vegetation.

The unit is equipped with advanced starting technology, including a digital ignition system that ensures easy starts with minimal effort, even in cold weather. The anti-vibration system incorporated into the design significantly reduces operator fatigue, allowing for prolonged use without discomfort. This system absorbs the vibrations generated by the engine, providing a smoother experience during operation.

The cutting attachment of the Zenoah SRTZ2601F features a dual cutting line head that allows for efficient trimming and edging. The head is designed for quick line replacement, reducing downtime during work. Additionally, users have the option to switch out the cutting head for blades, making the tool versatile for different types of vegetation.

The ergonomic design of the brushcutter promotes comfortable handling. The adjustable handle is easily configurable to suit the user's height and preferences, enhancing control and precision while in use. The lightweight design, coupled with a well-balanced construction, ensures that even extended periods of work become less tiring.

In terms of durability, the SRTZ2601F is built with high-quality materials that can withstand the rigors of daily use. Its rugged casing protects the internal components from impacts and environmental conditions, ensuring longevity and reliability.

Furthermore, this model supports various accessories, allowing for customization based on individual needs. Whether dealing with tough brush, trim work, or heavy-duty clearing tasks, the Zenoah SRTZ2601F is designed to meet the challenges head-on, making it an indispensable tool for anyone serious about landscaping.

Overall, the Zenoah SRTZ2601F combines power, efficiency, and user-friendly features, making it a top choice for both professional landscapers and home gardening enthusiasts looking for a reliable brushcutter.
Top Page Image Contents