Zenoah BCZ2601SU, BCZ2601SW manual If Someone Comes, Maintenance

Page 14

English

5. For safe operation

1.Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

2.Keep cutting attachment below waist level.

3.Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the level necessary.

4.If the unit start to shake or vibrate, turn off the engine and check the whole unit. Do not use it until the trouble has been properly corrected.

5.Keep all parts of your body away from rotating cutting attachment and hot surfaces.

6.Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or immediately after shutting down the engine. Doing so could result in serious burns or electrical shock.

• IF SOMEONE COMES

1.Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

■MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the engine before performing any maintenance or checking procedures.

(1) Check ok !

WARNING

The metallic parts reach high temperatures immediately after stopping the engine.

3.When replacing the cutting attachment or any other part, or when replacing the oil or any lubricant, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax product.

4.In the event that any part must be replaced or any maintenance or repair work not described in this

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OWNER/OPERATOR Manual Mode D’EMPLOI Manual DE Instrucciones Contents Advertencias Contenidas EN EL Manual Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOITables des matieres Contenido Specifications Parts locationEspecificaciohes Emplacement des pieces Situación de las piezasFiche technique Emission Control Symbols on the machinePosition Control DE Emisiones EmplacementPosición Working Circumstance For safe operationWorking Condition Condiciones DE Trabajo Consignes de securite Instrucciones de seguridadConditions DE Travail PrecaucionesWorking Plan Before Starting the EngineDE LA Machine Plan DE TravailPlan DE Trabajo Avant DE Mettre LE Moteur EN MarcheUsing the Product Starting the EngineUtilisation DE LA Machine USO DEL Producto Demarrage DU MoteurArranque DEL Motor Maintenance If Someone ComesSI Alguien SE Aproxima SI QUELQU’UN S’APPROCHEEntretien MantenimientoTransportation Handling FuelRefill after cooling the engine Manipulación DEL Combustible Manipulation DU CarburantTransport Llenar una vez que el motor se haya enfriadoSet up Assemblage Montaje Recommended Mixing Ratio Gasoline 50OIL When using Zenoah genuine oilFuel Lors de l’utilisation de la véritable huile Zenoah Rapport DE Melange Recommande Essence 50 HuileCarburant Combustible Proporción DE LA Mezcla Recomendada Gasolina 50 AceiteFor Your Engine LIFE, Avoid HOW to MIX FuelFueling the Unit Eviter Pour Prolonger LA Duree DE VIE DU Moteur Comment Obtenir UN BON Melange Como Mezclar EL CombustibleRemplissage DU Reservoir Abastecimiento DE LA UnidadFuel Aceite Para USO EN Motores DE 4-TIEMPOS Cutting head will start rotating upon the engine starts OperationOP1 OP2 Starting Engine OP3Fonctionnement Uso Palanca del estrangulador 2 cerrarOP5 Adjusting Throttle CableAdjusting Idling Speed OP6 OP6 Stopping Engine OP3Reglage DU Ralenti OP6 Reglage Câble D’ACCÉLÉRATEURAjuste Cable DEL Acelerador Travail DE Coupe Utilisation DE LA Tete a FILAdjusting the Line Length OP7Reglage DE LA Longeur DU FIL DE Coupe Ajuste DE LA Longitud DE LA LíneaMaintenance Maintenance ChartTableau D’ENTRETIEN EntretienMantenimiento Tabla DE MantenimientoAIR Filter MA1 MA2 MA3Refilling Trimming Line MA1 Fuel FilterFiltre a Carburant Entretien MantenimientoFiltre a AIR Filtro DE AireSpark Plug Replacement Plug is a NGK CMR7HMA4 Tightening TorquePARE-ETINCELLES Couple DE SerrageSilencieux LA Bujía DE Recambio Debe SER UNA Bujía NGK CMR7HIntake AIR Cooling Vent MA6Gear Case MA6 MA7Boitier DE Renvoi D’ANGLE MA6 Caja DE Engranajes MA6 Cilindro Toma de aire de refrigeración posteriorMA8 Procedures to be Performed After Every 100 Hours of USEStorage Entretien Mantenimiento Rangement Almacenamiento26~43.5 in-lbs 2.94~4.9 N.m Guard T3246-24110 Optional blade usageOPT1 OPT2 Bracket Handle26 43,5 pulg.-lbs Utilisation de la lame optionnelle Uso de hoja opcionalPAR Torsor 94 4,9 N.mChoose the Blade SET UP the BladeOPT3 OPT4 OPT5 Mise EN Place DE LA Lame Monte LA Hoja Choisir LA LameElija LA Hoja Operation OPT6 OPT7 OPT8 OPT9Cutting Method Método DE Corte Methode DE CoupeFonctionnement USOHow you can reduce the chance of blade thrust Controlling Blade ThrustWhat causes blade thrust Controle DES Coups DE Recul Control DEL Contragolpe DE LA HojaHow you can maintain the best control Maintenance BladeOPT10 22, 24-tooth blade Tooth blade Point OPT10Entretien Lame Comment conserver le meilleur contrôle de la machineCuál es la mejor forma de mantener el control Mantenimiento HojaGuide de localisation des pannes Troubleshooting guide12. Guía de localización y solución de problemas BCZ2601S NotaParts list Optional Blade & Accessories Engine UNITBCZ2601S S/N 60100101 and up Engine Unit BCZ2601S S/N 60100101 and up Manufacturer’s warranty coverage Owner’s warranty responsibilitiesCouverture de la garantie constructeur Obligations du propriétaire liées à la garantieCobertura de la garantía dada por el fabricante Responsabilidades del propietarioLimited Warranty RedMax Garantie limitée Garantía Limitada Komatsu Zenoah America INC

BCZ2601SU, BCZ2601SW specifications

The Zenoah BCZ2601SW and BCZ2601SU are powerful and reliable backpack blowers designed for professional landscapers and avid gardeners alike. These models are part of Zenoah's commitment to delivering high-quality outdoor power equipment that combines efficiency, durability, and user comfort. Both models share a range of impressive features and technologies that set them apart in the marketplace.

At the heart of the BCZ2601SW and BCZ2601SU is a robust 26cc two-stroke engine that ensures a strong performance and consistent airflow, capable of tackling thick debris and leaves with ease. The engines are designed with a focus on fuel efficiency and reduced emissions, aligning with the increasingly stringent environmental regulations. This balance between power and eco-friendliness makes these blowers suitable for extended periods of use without the worry of environmental impact.

One of the standout characteristics of these blowers is their lightweight design. Weighing in at just under 10 pounds, both models are easy to maneuver, allowing users to work for longer periods without fatigue. The ergonomic backpack design includes padded shoulder straps and a ventilated harness for added comfort during use. This means reduced strain on the operator, making these blowers ideal for large areas that require extensive cleaning.

The BCZ2601SW and BCZ2601SU also feature an advanced cooling system that helps maintain consistent engine temperature during operation, which prolongs the life of the blower and ensures optimal performance. Their easy-start capabilities minimize user frustration, allowing for a quick start-up even after extended periods of inactivity.

In terms of performance, these blowers deliver impressive air velocity and volume, effectively moving leaves and debris along pathways, gardens, and outdoor spaces. The adjustable throttle control provides users with the ability to set the blower at varying speeds for added versatility, catering to different tasks from light leaf blowing to heavy-duty clearing.

Overall, the Zenoah BCZ2601SW and BCZ2601SU are exemplary models crafted for those who demand performance, reliability, and comfort. Their combination of power, lightweight design, and user-friendly features makes them invaluable tools in maintaining outdoor spaces efficiently and effectively. Whether for professional use or personal gardening tasks, these blowers represent a solid investment for any landscape enthusiast.
Top Page Image Contents