Zenoah BCZ2601SW, BCZ2601SU manual Limited Warranty

Page 61

RedMax

LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT,

RedMax / KOMATSU ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.

EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSEMBLY, COIL ASSEMBLY, ROTOR, SPARKPLUG,

AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF USE, 90 DAYS FOR RENTAL USE, FROM THE DATE OF ORIGINAL PURCHASE, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DURABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAILURE OF A WARRANTED PART STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENTAL MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS OR ACCESSORIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE COMPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF USE FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL RedMax / KOMATSU ZENOAH AMERICA, INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL

OUT THE CARD AND SEND IT TO RedMax / KOMATSU ZENOAH AMERICA WITHIN SEVEN (7) DAYS. BE SURE TO KEEP A COPY FOR YOUR RECORDS.

KOMATSU ZENOAH AMERICA INC.

4344 Shackleford Road Suite 500

Norcross, Georgia 30093

Page 60 Page 62
Image 61
Page 60 Page 62
Contents OWNER/OPERATOR Manual Mode D’EMPLOI Manual DE Instrucciones Contents Tables des matieres Contenido Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOIAdvertencias Contenidas EN EL Manual Parts location SpecificationsFiche technique Emplacement des pieces Situación de las piezasEspecificaciohes Position Symbols on the machineEmission Control Posición EmplacementControl DE Emisiones Working Condition For safe operationWorking Circumstance Conditions DE Travail Consignes de securite Instrucciones de seguridadCondiciones DE Trabajo PrecaucionesBefore Starting the Engine Working PlanPlan DE Trabajo Plan DE TravailDE LA Machine Avant DE Mettre LE Moteur EN MarcheStarting the Engine Using the ProductArranque DEL Motor Demarrage DU MoteurUtilisation DE LA Machine USO DEL Producto If Someone Comes MaintenanceEntretien SI QUELQU’UN S’APPROCHESI Alguien SE Aproxima MantenimientoRefill after cooling the engine Handling FuelTransportation Transport Manipulation DU CarburantManipulación DEL Combustible Llenar una vez que el motor se haya enfriadoSet up Assemblage Montaje Fuel When using Zenoah genuine oilRecommended Mixing Ratio Gasoline 50OIL Carburant Combustible Rapport DE Melange Recommande Essence 50 HuileLors de l’utilisation de la véritable huile Zenoah Proporción DE LA Mezcla Recomendada Gasolina 50 AceiteFueling the Unit HOW to MIX FuelFor Your Engine LIFE, Avoid Remplissage DU Reservoir Comment Obtenir UN BON Melange Como Mezclar EL CombustibleEviter Pour Prolonger LA Duree DE VIE DU Moteur Abastecimiento DE LA UnidadFuel Aceite Para USO EN Motores DE 4-TIEMPOS OP1 OP2 Starting Engine OperationCutting head will start rotating upon the engine starts OP3Palanca del estrangulador 2 cerrar Fonctionnement UsoAdjusting Idling Speed OP6 Adjusting Throttle CableOP5 OP6 Stopping Engine OP3Ajuste Cable DEL Acelerador Reglage Câble D’ACCÉLÉRATEURReglage DU Ralenti OP6 Travail DE Coupe Utilisation DE LA Tete a FILOP7 Adjusting the Line LengthAjuste DE LA Longitud DE LA Línea Reglage DE LA Longeur DU FIL DE CoupeMaintenance Chart MaintenanceMantenimiento EntretienTableau D’ENTRETIEN Tabla DE MantenimientoRefilling Trimming Line MA1 MA1 MA2 MA3AIR Filter Fuel FilterFiltre a AIR Entretien MantenimientoFiltre a Carburant Filtro DE AireMA4 Replacement Plug is a NGK CMR7HSpark Plug Tightening TorqueSilencieux Couple DE SerragePARE-ETINCELLES LA Bujía DE Recambio Debe SER UNA Bujía NGK CMR7HGear Case MA6 MA6Intake AIR Cooling Vent MA7Cilindro Toma de aire de refrigeración posterior Boitier DE Renvoi D’ANGLE MA6 Caja DE Engranajes MA6Storage Procedures to be Performed After Every 100 Hours of USEMA8 Rangement Almacenamiento Entretien MantenimientoOPT1 OPT2 Optional blade usage26~43.5 in-lbs 2.94~4.9 N.m Guard T3246-24110 Bracket HandlePAR Torsor Utilisation de la lame optionnelle Uso de hoja opcional26 43,5 pulg.-lbs 94 4,9 N.mOPT3 OPT4 OPT5 SET UP the BladeChoose the Blade Elija LA Hoja Choisir LA LameMise EN Place DE LA Lame Monte LA Hoja Cutting Method OPT6 OPT7 OPT8 OPT9Operation Fonctionnement Methode DE CoupeMétodo DE Corte USOWhat causes blade thrust Controlling Blade ThrustHow you can reduce the chance of blade thrust Control DEL Contragolpe DE LA Hoja Controle DES Coups DE ReculOPT10 Maintenance BladeHow you can maintain the best control 22, 24-tooth blade Tooth blade Point OPT10Cuál es la mejor forma de mantener el control Comment conserver le meilleur contrôle de la machineEntretien Lame Mantenimiento Hoja12. Guía de localización y solución de problemas Troubleshooting guideGuide de localisation des pannes Nota BCZ2601SParts list Optional Blade & Accessories Engine UNITBCZ2601S S/N 60100101 and up Engine Unit BCZ2601S S/N 60100101 and up Owner’s warranty responsibilities Manufacturer’s warranty coverageObligations du propriétaire liées à la garantie Couverture de la garantie constructeurResponsabilidades del propietario Cobertura de la garantía dada por el fabricanteLimited Warranty RedMax Garantie limitée Garantía Limitada Komatsu Zenoah America INC

BCZ2601SU, BCZ2601SW specifications

The Zenoah BCZ2601SW and BCZ2601SU are powerful and reliable backpack blowers designed for professional landscapers and avid gardeners alike. These models are part of Zenoah's commitment to delivering high-quality outdoor power equipment that combines efficiency, durability, and user comfort. Both models share a range of impressive features and technologies that set them apart in the marketplace.

At the heart of the BCZ2601SW and BCZ2601SU is a robust 26cc two-stroke engine that ensures a strong performance and consistent airflow, capable of tackling thick debris and leaves with ease. The engines are designed with a focus on fuel efficiency and reduced emissions, aligning with the increasingly stringent environmental regulations. This balance between power and eco-friendliness makes these blowers suitable for extended periods of use without the worry of environmental impact.

One of the standout characteristics of these blowers is their lightweight design. Weighing in at just under 10 pounds, both models are easy to maneuver, allowing users to work for longer periods without fatigue. The ergonomic backpack design includes padded shoulder straps and a ventilated harness for added comfort during use. This means reduced strain on the operator, making these blowers ideal for large areas that require extensive cleaning.

The BCZ2601SW and BCZ2601SU also feature an advanced cooling system that helps maintain consistent engine temperature during operation, which prolongs the life of the blower and ensures optimal performance. Their easy-start capabilities minimize user frustration, allowing for a quick start-up even after extended periods of inactivity.

In terms of performance, these blowers deliver impressive air velocity and volume, effectively moving leaves and debris along pathways, gardens, and outdoor spaces. The adjustable throttle control provides users with the ability to set the blower at varying speeds for added versatility, catering to different tasks from light leaf blowing to heavy-duty clearing.

Overall, the Zenoah BCZ2601SW and BCZ2601SU are exemplary models crafted for those who demand performance, reliability, and comfort. Their combination of power, lightweight design, and user-friendly features makes them invaluable tools in maintaining outdoor spaces efficiently and effectively. Whether for professional use or personal gardening tasks, these blowers represent a solid investment for any landscape enthusiast.
Top Page Image Contents