Zenoah BCZ2500SU, BCZ2500SW manual If Someone Comes, Maintenance, Handling Fuel,  11 

Page 11

5. For safe operation

• IF SOMEONE COMES

1.Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the engine before performing any maintenance or checking procedures.

WARNING

The metallic parts reach high temperatures immediately after stopping the engine.

3.When replacing the cutting attachment or any other part, or when replacing the oil or any lubricant, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax product.

4.In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest RedMax authorized servicing dealer for assistance.

5.Do not use any accessory or attachment other than those bearing the RedMax mark and recommended for the unit.

6.Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged during operation or the product becoming unable to operate properly.

HANDLING FUEL

1.The engine of the RedMax product is designed to run on a mixed fuel which contains highly flammable gasoline. Never store cans of fuel or

11

Image 11
Contents BCZ2500SU T3002-93111BCZ2500S BCZ2500SWPage Contents Safety First 4  SpecificationsParts location BCZ2500S/BCZ2500SU/BCZ2500SW Overall sizeLxWxH 5   6  Symbols on the machineType de moteur 1KZXS.0254QR EM Cylindrée du moteur 25,4cc Working Circumstance For safe operationWorking Condition  8  Working Plan 9  Before Starting the EngineStarting the Engine  10  Using the Product 11  MaintenanceIf Someone Comes Handling Fuel 12  Transportation 13  Putting on Waist PAD SE5SE6 SE7 SE8 SE9 Mounting Engine SE5Balance Unit Set upInstalling Cutting Head SE10 SE10 SE11Recommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  16  17  Fueling the UnitFor Your Engine LIFE, Avoid OP4 OperationOP1 Starting Engine 19   20  Adjusting the Line LengthOP7 MA1 MA2 MA3 MA4 Refilling Trimming Line MaintenanceMaintenance Chart For safety reasons, do not use metalreinforced line 22  Intake AIR Cooling Vent MA8 MA9Spark Arrester Gear Case MA9 24  Procedures to be Performed After Every 100 Hours of USEMA101 MA11 Cylinder Intake air cooling vent back 25  Storage 26  Optional blade usageCutting Method OPT3BCZ2500SU OPT4 OPT5 OPT6Controlling Blade Bounce OPT7 OPT8 28  Operation 29  What causes kick outHow you can reduce the chance of kick out How you can maintain the best control 30  OPT9 Maintenance BladeTransporting the Unit  31  Troubleshooting guideCheck Probable Causes Action  32   33  Parts list 34   35  Optional Blade & Accessories 36  Drive Unit BCZ2500SW S/N 100001 and up 37  Optional Blade 38   39  BCZ2500S S/N 35208 and up BCZ2500SU S/N 35208 and upManufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans