Zenoah BCZ2500SU, BCZ2500SW manual Optional blade usage,  26 

Page 26

11. Optional blade usage

OPT1

		9” 22-tooth:	8” 8-tooth:	8” 4-tooth:
	CUTTER	SST229	SGB088	SGB048					Nylon line
	CUTTER	9” 24-tooth:	9” 8-tooth:	9” 4-tooth:					Nylon line
	APPLICATION	9” 24-tooth:	9” 8-tooth:	9” 4-tooth:					head
	APPLICATION	SST249	SGB089	SGB049
	CHART
	CHART

Under growth

Heavy weeds

Light weeds

Grass

■CHOOSE THE BLADE

Choose a suitable recommended cutting attachment according to the object to be cut. (OPT1)

•When replacing blade always be sure to use products which have been certified by RedMax.

WARNING

OPT2

(1)

(2)

•When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools and equipment to prevent injury.

■SET UP

1.Detach the line head assembly completely. (OPT2)

2.Put on the blade, making the marked side face the holder, put on the outer holders, and fasten the blade with the blade nut. (OPT2)

(1)Cover: 3540-13283

(2)Holder: 6019-13250 (Attachment)

26 

Image 26

Contents BCZ2500SW T3002-93111BCZ2500S BCZ2500SUPage Safety First ContentsBCZ2500S/BCZ2500SU/BCZ2500SW Overall sizeLxWxH SpecificationsParts location  4  5   6  Symbols on the machineType de moteur 1KZXS.0254QR EM Cylindrée du moteur 25,4cc Working Circumstance For safe operationWorking Condition Working Plan  8  9  Before Starting the EngineStarting the Engine Using the Product  10 Handling Fuel MaintenanceIf Someone Comes  11 Transportation  12  13  SE7 SE8 SE9 Mounting Engine SE5 SE5SE6 Putting on Waist PADSE10 SE11 Set upInstalling Cutting Head SE10 Balance Unit 16  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OIL 17  Fueling the UnitFor Your Engine LIFE, Avoid Starting Engine OperationOP1 OP4 19   20  Adjusting the Line LengthOP7 For safety reasons, do not use metalreinforced line MaintenanceMaintenance Chart MA1 MA2 MA3 MA4 Refilling Trimming Line 22  Gear Case MA9 MA8 MA9Spark Arrester Intake AIR Cooling VentCylinder Intake air cooling vent back Procedures to be Performed After Every 100 Hours of USEMA101 MA11  24 Storage  25 Optional blade usage  26 OPT5 OPT6 OPT3BCZ2500SU OPT4 Cutting MethodOperation OPT7 OPT8 28  Controlling Blade BounceHow you can maintain the best control What causes kick outHow you can reduce the chance of kick out  29  30  OPT9 Maintenance BladeTransporting the Unit  31  Troubleshooting guideCheck Probable Causes Action  32  Parts list  33  34  Optional Blade & Accessories  35 Drive Unit BCZ2500SW S/N 100001 and up  36 Optional Blade  37  38  BCZ2500S S/N 35208 and up BCZ2500SU S/N 35208 and up  39 Manufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans