Zenoah BCZ2500SW, BCZ2500SU manual Parts list,  33 

Page 33

13. Parts list

BRUSHCUTTERS

BCZ2500S

BCZ2500SU

BCZ2500SW

NOTE :

1.Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement.

2.KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.

3.When placing parts orders for repair and/or replacement, check if the model name and the serial number are applicable to those specified in the parts list, then use parts number described in the parts list.

4.The contents described in the parts list may change due to improvement.

5.The parts for the machine shall be supplied seven (7) years after the machine is discontinued. [It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of seven (7) years after the machine is discontinued. It is also possible that some parts may be available even after the limit of seven (7) years.]

APPLICABLE SERIAL NUMBERS :						May 2002
BCZ2500S	DRIVE UNIT 900101		and up	ENGINE UNIT 35208		and up
BCZ2500SU	DRIVE UNIT	000000	and up	ENGINE UNIT	35208	and up
BCZ2500SW	DRIVE UNIT	100001	and up	ENGINE UNIT	35208	and up

33 

Image 33

Contents BCZ2500S T3002-93111BCZ2500SW BCZ2500SUPage Contents Safety FirstParts location SpecificationsBCZ2500S/BCZ2500SU/BCZ2500SW Overall sizeLxWxH  4  5  Symbols on the machine Type de moteur 1KZXS.0254QR EM Cylindrée du moteur 25,4cc 6  For safe operation Working ConditionWorking Circumstance  8  Working PlanBefore Starting the Engine Starting the Engine 9   10  Using the ProductIf Someone Comes MaintenanceHandling Fuel  11  12  Transportation 13  SE6 SE5SE7 SE8 SE9 Mounting Engine SE5 Putting on Waist PADInstalling Cutting Head SE10 Set upSE10 SE11 Balance UnitFuel HOW to MIX Fuel 16  Recommended Mixing Ratio Gasoline 50OILFueling the Unit For Your Engine LIFE, Avoid 17  OP1 OperationStarting Engine OP4 19  Adjusting the Line Length OP7 20  Maintenance Chart MaintenanceFor safety reasons, do not use metalreinforced line MA1 MA2 MA3 MA4 Refilling Trimming Line 22  Spark Arrester MA8 MA9Gear Case MA9 Intake AIR Cooling VentMA101 MA11 Procedures to be Performed After Every 100 Hours of USECylinder Intake air cooling vent back  24  25  Storage 26  Optional blade usageBCZ2500SU OPT4 OPT3OPT5 OPT6 Cutting Method 28  OPT7 OPT8Operation Controlling Blade BounceHow you can reduce the chance of kick out What causes kick outHow you can maintain the best control  29 OPT9 Maintenance Blade Transporting the Unit 30  Troubleshooting guide Check Probable Causes Action 31   32   33  Parts list 34   35  Optional Blade & Accessories 36  Drive Unit BCZ2500SW S/N 100001 and up 37  Optional Blade 38   39  BCZ2500S S/N 35208 and up BCZ2500SU S/N 35208 and upManufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans