Zenoah BCZ2500SU, BCZ2500SW manual Fueling the Unit, For Your Engine LIFE, Avoid,  17 

Page 17

7. Fuel

container to avoid mixing up with gasoline or other containers.

6.Indicate the contents on outside of container for easy identification.

FUELING THE UNIT

1.Untwist and remove the fuel cap. Rest the cap on a dustless place.

2.Put fuel into the fuel tank to 80% of the full capacity.

3.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

WARNING

1.Select bare ground for fueling.

2.Move at least 10 feet (3 meters) away from the fueling point before starting the engine.

3.Stop the engine before refueling the unit.

FOR YOUR ENGINE LIFE, AVOID;

1.FUEL WITH NO OIL(RAW GASOLINE) – It will cause severe damage to the internal engine parts very quickly.

2.GASOHOL – It can cause deterioration of rubber and/or plastic parts and disruption of engine lubrication.

3.OIL FOR 4-CYCLE ENGINE USE or WATER COOLED 2-CYCLE ENGINE USE – It can cause spark plug fouling, exhaust port blocking, or piston ring sticking.

4.Mixed fuels which have been left unused for a period of one month or more may clog the carburetor and result in the engine failing to operate properly.

17

Image 17
Contents BCZ2500S T3002-93111BCZ2500SW BCZ2500SUPage Contents Safety FirstParts location SpecificationsBCZ2500S/BCZ2500SU/BCZ2500SW Overall sizeLxWxH  4  5   6  Symbols on the machineType de moteur 1KZXS.0254QR EM Cylindrée du moteur 25,4cc Working Circumstance For safe operationWorking Condition  8  Working Plan 9  Before Starting the EngineStarting the Engine  10  Using the ProductIf Someone Comes MaintenanceHandling Fuel  11  12  Transportation 13  SE6 SE5SE7 SE8 SE9 Mounting Engine SE5 Putting on Waist PADInstalling Cutting Head SE10 Set upSE10 SE11 Balance UnitFuel HOW to MIX Fuel 16  Recommended Mixing Ratio Gasoline 50OIL 17  Fueling the UnitFor Your Engine LIFE, Avoid OP1 OperationStarting Engine OP4 19   20  Adjusting the Line LengthOP7 Maintenance Chart MaintenanceFor safety reasons, do not use metalreinforced line MA1 MA2 MA3 MA4 Refilling Trimming Line 22  Spark Arrester MA8 MA9Gear Case MA9 Intake AIR Cooling VentMA101 MA11 Procedures to be Performed After Every 100 Hours of USECylinder Intake air cooling vent back  24  25  Storage 26  Optional blade usageBCZ2500SU OPT4 OPT3OPT5 OPT6 Cutting Method 28  OPT7 OPT8Operation Controlling Blade BounceHow you can reduce the chance of kick out What causes kick outHow you can maintain the best control  29  30  OPT9 Maintenance BladeTransporting the Unit  31  Troubleshooting guideCheck Probable Causes Action  32   33  Parts list 34   35  Optional Blade & Accessories 36  Drive Unit BCZ2500SW S/N 100001 and up 37  Optional Blade 38   39  BCZ2500S S/N 35208 and up BCZ2500SU S/N 35208 and upManufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans