Zenoah EXZ2500S-BC, EX-BC, EX-LRT, EX-PS, EX-HE EX-BC SE1 SE2 Installing Debris Guard,  14 

6. Set up (EX-BC only)

EX-BC

SE1

(1)

(2)

(3)

EX-BC

SE2

■INSTALLING DEBRIS GUARD

•Put the debris guard on the gear box, attach it with the 4 screws and hardware provided. (SE1)

(1)debris guard

(2)plate

(3)screw

■INSTALLING CUTTING HEAD (SE2)

1.While locking the gear shaft, by inserting the supplied tool into the upper holder on the gear box, loosen and remove the hexagon nut(left- handed)

2.Then screw in the cutting head to the gear shaft over the holders. Hand-tighten it securely.

EX-BC SE3

■BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head just touching on the ground. (SE3)

14 