Zenoah EXZ2600DL, EXZ2500S-BC manual Ex-Lrt Att Ex-Ps Att Ex-He Att, Parts list

Page 45

12. Parts list

EXtreme™

EXZ2500S-BC

EXZ-PU

EX-BC

 ENGINE

EX-LRT (ATT)

EX-PS (ATT)

EX-HE (ATT)

NOTE :

1.Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement.

2.KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.

3.When placing parts orders for repair and/or replacement, check if the model name and the serial number are applicable to those specified in the parts list, then use parts number described in the parts list.

4.The contents described in the parts list may change due to improvement.

5.The parts for the machine shall be supplied seven (7) years after the machine is discontinued. [It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of seven (7) years after the machine is discontinued. It is also possible that some parts may be available even after the limit of seven (7) years.]

APPLICABLE SERIAL NUMBERS :

Mar. 2003

EXZ-PU

302845

and up

 

EX-BC

302960

and up

 

EX-LRT

000531

and up

ENGINE UNIT 50100000 and up

EX-PS

000000

and up

 

EX-HE

000101

and up

 

 

 

 

 

 

 

 

45

Image 45
Contents 848-BP6-93A1 OWNER/OPERATOR ManualContents Safety First 3  Parts location 4  Specifications 5   6  Symbols on the machineWorking Condition For safe operationWorking Circumstance  7  8  Working PlanBefore Starting the Engine Starting the Engine 9   10  Using the ProductIf Someone Comes MaintenanceHandling Fuel  11  12  Transportation 13  Set upInstalling Cutting Head SE2 EX-BC SE1 SE2 Installing Debris GuardDebris guard Plate Screw EX-BC SE3 Balance UnitEX-LRT SE1 Attaching the Trimming Mechanism SE1 Main pipe Trimming mechanism Screw hole Fastening bolt 15  EX-PS SE2 EX-PS SE1 Attaching the Pruning Mechanism SE1EX-PS SE3  16 EX-PS SE4 EX-PS SE5 EX-PS SE6 Chain tension adjusting screw Loosen TightenHole Moving direction Chain tensioner nut  17 Clamp bolt Lock screw EX-HE SE1 EX-HE SE2 EX-HE SE3 EX-HE SE4Bracket  18 Fuel HOW to MIX FuelRecommended Mixing Ratio Gasoline 50OIL  19 Fueling the Unit For Your Engine LIFE, Avoid 20   21  OperationOP6 OP7 OP8 Stopping Engine OP6 22  Adjusting Idling Speed OP10 Adjusting Throttle CableOP9  23  24  Operation EX-BC only 25  Bracket Handle EX-BC OP4 EX-BC OP5 EX-BC OP6Cutting Method  26 Controlling Blade Bounce EX-BC OP7 EX-BC OP8 OperationWhat causes kick out  27 How you can reduce the chance of kick out How you can maintain the best control 28  EX-BC OP9 Maintenance Blade Transporting the Unit 29  Operation EX-LRT only Adjusting the Angle of the Cutting Blades OP1EX-LRT OP1 Clamp lever Trimming mechanismOperation EX-PS only Adjusting OIL Flow RateEX-PS OP1 EX-PS OP2 Checking OIL Supply  31  32  Operation EX-HE only EX-HE OP1 33  Maintenance Maintenance Chart 34   35   36  MA4Muffler Spark ArresterMA51 Procedures to be Performed After Every 100 Hours of USEMA6 Cylinder Intake air cooling vent backFor safety reasons, do not use metalreinforced line Maintenance EX-BC onlyGear Case MA5  38 Upper blade Lower blade EX-LRT MA1 EX-LRT MA2 Blades MA1Quick TIP Gear CaseEX-PS MA1 MA2 MA3 Oiling Port Maintenance EX-PS onlyGuide BAR  40 EX-PS MA4 MA5 MA6 SprocketSAW Chain  42  EX-PS MA7 MA8 MA9Maintenance EX-HE only MA1 Gear Case 43  Storage Troubleshooting guideCheck Probable Causes Action  44 EX-LRT ATT EX-PS ATT EX-HE ATT Parts list 46  EXZ-PU S/N 302845 and up 47   48  EX-BC S/N 302960 and up 49   50  Engine Unit 50100000 and upDescription Part Number Qty  51  52  EX-LRT S/N 000531 and upCasing B  53  54  EX-PS S/N 000000 and up 55   56  EX-HE S/N 000101 and up 57  Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC