Zenoah G3200 manual Fueling the Unit, For Your Engine LIFE, Avoid,  12 , Chain OIL

Page 12

6. Fuel and Chain oil

4.Pour In the rest of gasoline and agitate again for at least one minute. As some oils may be difficult to agitate depending on oil ingredients, sufficient agitation is necessary for the engine to last long. Be careful that, if the agitation is insufficient, there is an increased danger of early piston seizing due to abnormally lean mixture.

5.Put a clear indication on the outside of the container to avoid mixing up with gasoline or other containers.

6.Indicate the contents on outside of container for easy identification.

FUELING THE UNIT

1.Untwist and remove the fuel cap. Rest the cap on a dustless place.

2.Put fuel into the fuel tank to 80% of the full capacity.

3.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

WARNING

1.Select bare ground for fueling.

2.Move at least 10feet (3meters) away from the fueling point before starting the engine.

3.Stop the engine before refueling the unit. At that time, be sure to sufficiently agitate the mixed gasoline in the container.

FOR YOUR ENGINE LIFE, AVOID;

1.FUEL WITH NO OIL(RAW GASOLINE) – It will cause severe damage to the internal engine parts very quickly.

2.GASOHOL – It can cause deterioration of rubber and/or plastic parts and disruption of engine lubrication.

3.OIL FOR 4-CYCLE ENGINE USE – It can cause spark plug fouling, exhaust port blocking, or piston ring sticking.

4.Mixed fuels which have been left unused for a period of one month or more may clog the carburetor and result

in the engine failing to operate properly.

12

5.In the case of storing the product for a long period of time, clean the fuel tank after rendering it empty. Next, activate the engine and empty the carburetor of the composite fuel.

6.In the case of scrapping the used mixed oil container, scrap it only at an authorized repository site.

NOTE

As lot details of quality assurance, read the description in the section Limited Warranty carefully. Moreover, normal wear and change in product with no functional influence are not covered by the warranty. Also, be careful that, if the usage in the instruction manual is not observed as to the mixed gasoline, etc. described therein, it may not be covered by the warranty.

CHAIN OIL

Use motor oil SAE 10W-30 all year round, or SAE 30-40 in summer and SAE 20 in winter.

NOTE

Do not use waste or regenerated oil that can cause damage to the oil pump.

Image 12
Contents G3200 G3200EZ 848-C3A-93A1Page Safety First ContentsSpecifications G3200 / G3200EZ Power unitParts location  4 Symbols on the machine Utilise Jaso FC ou ISO EGC 501 HuileFor safe operation  6 Kickback Safety Precautions for Chain SAW Users  7 Installing guide bar and saw chain  8 Nut assembly Chain cover Loosen F5-4 F5-5 F5-6G3200EZ Projection a Projection B Projection CNut assembly Chain cover Lever Proper tension, No gap F5-7 F5-8 10  Loosen Bar protectorWhen using RedMax/ZENOAH genuine oil HOW to MIX FuelFuel and Chain oil Recommended Mixing Ratio Gasoline 50OILFueling the Unit For Your Engine LIFE, Avoid 12  Chain OILOperation Starting the EngineRich 2 Lean 3 Chain oil flow adjusting Adjusting the CarburetorF7-6 F7-7  14 Chain Brake F7-11 F7-12 Stopping the Engine 16  Sawing Guard Against Kickback F8-1 17  F8-2 Felling a Tree F8-2 18  F8-3 F8-4 F8-5 F8-6 Log lying on the ground F8-3 Log hanging off the ground F8-4Cutting Limb of Fallen Tree F8-5  19 Maintenance Maintenance After Each USERCJ-7Y F9-8 F9-9 F9-10 Spark arresterExhaust port Muffler exhaust vent Cylinder exhaust port SprocketMaintenance of Saw Chain and Guide Bar F10-1 F10-2SAW Chain  23 F10-3 F10-4 Guide BARRuler Gap No gap Chain tilts  24 Troubleshooting Guide Case 2. Lack of power/Poor acceleration/Rough idlingCase 3. Oil does not come out  25 Storage Disposal 26  Parts list  27 Power Unit S/N 600001 and up  28  29   30   31  Power Unit S/N 632994 and up  32  33   34   35  G3200/G3200EZ  36 Accessories G3200 600001 and up G3200EZ 632994 and up  37 Chain Saws Limited Warranty Garantie limitée des tronçonneuses Zenoah AMERICA, INC

G3200 specifications

The Zenoah G3200 stands as a quintessential power tool in the realm of engine technology, especially favored in the world of remote-controlled (RC) aircraft and various small machinery applications. Known for its exceptional engineering, the G3200 is a lighter, high-performance engine that combines power, efficiency, and reliability.

One of the main features of the Zenoah G3200 is its 32cc displacement, which allows it to deliver robust power without significantly increasing weight. This makes it an ideal choice for hobbyists looking for a balance between performance and maneuverability in their RC crafts. With an output of approximately 2.5 horsepower, the engine is capable of powering various models ranging from airplanes to helicopters and even lawn equipment.

The G3200 utilizes a high-efficiency, reed valve induction system. This technology optimizes airflow into the combustion chamber, enhancing throttle response and overall performance. The engine is designed with a lightweight aluminum crankcase, which contributes not only to its overall weight savings but also to cooling efficiency. This is crucial during extended use, as it ensures the engine maintains its optimal operating temperature.

Another distinguishing characteristic of the Zenoah G3200 is its integrated electronic ignition system. This system offers quick starts and dependable reliability, reducing the frustrating experiences often associated with traditional ignition systems. Coupled with its high-performance spark plug, the G3200 provides consistent ignition and operational durability, even under varying weather conditions.

The engine is equipped with a microfinned cylinder, which increases the heat dissipation capability. This feature is essential for ensuring that the engine operates effectively over long periods, minimizing the risk of overheating. The carburetor, which is tuned for both power and fuel efficiency, allows users to achieve the optimal air-fuel mixture easily.

With its versatile application range, the Zenoah G3200 is also praised for its ease of maintenance. The design facilitates simple access to key components, simplifying the process of tune-ups and repairs. Overall, the Zenoah G3200 stands as a testament to cutting-edge engineering, embodying reliability, performance, and user-friendliness, making it a top choice for both hobbyists and professionals alike.