Zenoah G3200 manual Sawing, Guard Against Kickback F8-1,  17 

Page 17

8. Sawing

F8-1

WARNING

•Before proceeding to your job, read "For Safe Operation" section It is recommended to first practice sawing easy logs. This also helps you get accustomed to your unit.

•Always follow the safety regulations. The chain saw must only be used for cutting wood. It is forbidden to cut other types of material. Vibrations and kickback vary with different materials and the requirements of the safety regulations would not be respected. Do not use the chain saw as a lever for lifting, moving or splitting objects. Do not lock it over fixed stands. It is forbidden to hitch tools or applications to the P.t.o. that are not specified by the manufacturer.

•It is not necessary to force the saw into the cut. Apply only light pressure while running the engine at full throttle.

•When the saw chain is caught in the cut, do not attempt to pull it out by force, but use a wedge or a lever to open the way.

■GUARD AGAINST KICKBACK (F8-1)

•This saw is equipped with a chain brake that will stop the chain in the event of kickback if operating properly. You must check the chain brake operation before each usage by running the saw at full the throttle for I -2 seconds and pushing the front hand guard forward. The chain should stop immediately with the engine at full speed. If the chain is slow to stop or does not stop, replace the brake band and clutch drum before use.

•It is extremely important that the chain brake be checked for proper operation before each use and that the chain be sharp in order to maintain the kickback safety level of this saw. Removal of the safety devices, inadequate maintenance, or incorrect replacement of the bar or chain may increase the risk ot serious personal injury due to kickback.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 848-C3A-93A1 G3200 G3200EZPage Contents Safety FirstG3200 / G3200EZ Power unit SpecificationsParts location  4 Utilise Jaso FC ou ISO EGC 501 Huile Symbols on the machine 6  For safe operation 7  Kickback Safety Precautions for Chain SAW Users 8  Installing guide bar and saw chainF5-4 F5-5 F5-6 Nut assembly Chain cover LoosenG3200EZ Projection a Projection B Projection CF5-7 F5-8 Nut assembly Chain cover Lever Proper tension, No gap 10  Loosen Bar protectorHOW to MIX Fuel When using RedMax/ZENOAH genuine oilFuel and Chain oil Recommended Mixing Ratio Gasoline 50OILFor Your Engine LIFE, Avoid Fueling the Unit 12  Chain OILStarting the Engine OperationAdjusting the Carburetor Rich 2 Lean 3 Chain oil flow adjustingF7-6 F7-7  14 Chain Brake  16  F7-11 F7-12Stopping the Engine  17  SawingGuard Against Kickback F8-1  18  F8-2Felling a Tree F8-2 Log hanging off the ground F8-4 F8-3 F8-4 F8-5 F8-6 Log lying on the ground F8-3Cutting Limb of Fallen Tree F8-5  19 Maintenance After Each USE MaintenanceRCJ-7Y Spark arrester F9-8 F9-9 F9-10Exhaust port Muffler exhaust vent Cylinder exhaust port SprocketF10-1 F10-2 Maintenance of Saw Chain and Guide BarSAW Chain  23 Guide BAR F10-3 F10-4Ruler Gap No gap Chain tilts  24 Case 2. Lack of power/Poor acceleration/Rough idling Troubleshooting GuideCase 3. Oil does not come out  25  26  StorageDisposal  27  Parts list 28  Power Unit S/N 600001 and up 29   30   31   32  Power Unit S/N 632994 and up 33   34   35   36  G3200/G3200EZ 37  Accessories G3200 600001 and up G3200EZ 632994 and upChain Saws Limited Warranty Garantie limitée des tronçonneuses Zenoah AMERICA, INC

G3200 specifications

The Zenoah G3200 stands as a quintessential power tool in the realm of engine technology, especially favored in the world of remote-controlled (RC) aircraft and various small machinery applications. Known for its exceptional engineering, the G3200 is a lighter, high-performance engine that combines power, efficiency, and reliability.

One of the main features of the Zenoah G3200 is its 32cc displacement, which allows it to deliver robust power without significantly increasing weight. This makes it an ideal choice for hobbyists looking for a balance between performance and maneuverability in their RC crafts. With an output of approximately 2.5 horsepower, the engine is capable of powering various models ranging from airplanes to helicopters and even lawn equipment.

The G3200 utilizes a high-efficiency, reed valve induction system. This technology optimizes airflow into the combustion chamber, enhancing throttle response and overall performance. The engine is designed with a lightweight aluminum crankcase, which contributes not only to its overall weight savings but also to cooling efficiency. This is crucial during extended use, as it ensures the engine maintains its optimal operating temperature.

Another distinguishing characteristic of the Zenoah G3200 is its integrated electronic ignition system. This system offers quick starts and dependable reliability, reducing the frustrating experiences often associated with traditional ignition systems. Coupled with its high-performance spark plug, the G3200 provides consistent ignition and operational durability, even under varying weather conditions.

The engine is equipped with a microfinned cylinder, which increases the heat dissipation capability. This feature is essential for ensuring that the engine operates effectively over long periods, minimizing the risk of overheating. The carburetor, which is tuned for both power and fuel efficiency, allows users to achieve the optimal air-fuel mixture easily.

With its versatile application range, the Zenoah G3200 is also praised for its ease of maintenance. The design facilitates simple access to key components, simplifying the process of tune-ups and repairs. Overall, the Zenoah G3200 stands as a testament to cutting-edge engineering, embodying reliability, performance, and user-friendliness, making it a top choice for both hobbyists and professionals alike.
Top Page Image Contents