Kickback Safety Precautions for Chain SAW Users

4. For safe operation

17.Operate the chain saw only in well ventilated areas. Never start or run the engine inside a closed room or building. Exhaust fumes contain dangerous carbon monoxide.

18.Do not operate a chain saw in a tree unless specially trained to do so.

19.Guard against kickback. Kickback is the upward motion of the guide bar which occurs when the saw chain at the nose of the guide bar contacts an object. Kickback can lead to dangerous loss of control of the chain saw.

20.When transporting your chain saw, make sure the appropriate guide bar scabbard is in place.

21.This chain saw is equipped with a spark arrester built-in muffler. Periodically check the arrester to keep it in good order.

KICKBACK SAFETY PRECAUTIONS FOR

CHAIN SAW USERS

WARNING

●Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious personal injury.

●Do not rely exclusively on the safety devices built into your saw. As a chain saw user you should take several steps to keep cutting jobs free from accident or injury.

(1)With a basic understanding of kickback you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents.

(2)Keep a good grip on the saw with both hands, the right hand on the rear handle, and the left hand on the front handle, when the engine is running. Use a firm grip with thumbs and fingers encircling the chain saw handles. A firm grip will help you reduce kickback and maintain control of the saw. Don’t let go.

(3)Make certain that the area in which you’re cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, or any other obstruction which could be hit while you are operating the saw.

(4)Cut at high engine speeds.

(5)Do not overreach or cut above shoulder height.

(6)Follow manufacturers sharpening and maintenance instructions for saw chain.

(7)Only use replacement bars and chains specified by the manufacturer or the equivalent.

7 

G3200 specifications

The Zenoah G3200 stands as a quintessential power tool in the realm of engine technology, especially favored in the world of remote-controlled (RC) aircraft and various small machinery applications. Known for its exceptional engineering, the G3200 is a lighter, high-performance engine that combines power, efficiency, and reliability.

One of the main features of the Zenoah G3200 is its 32cc displacement, which allows it to deliver robust power without significantly increasing weight. This makes it an ideal choice for hobbyists looking for a balance between performance and maneuverability in their RC crafts. With an output of approximately 2.5 horsepower, the engine is capable of powering various models ranging from airplanes to helicopters and even lawn equipment.

The G3200 utilizes a high-efficiency, reed valve induction system. This technology optimizes airflow into the combustion chamber, enhancing throttle response and overall performance. The engine is designed with a lightweight aluminum crankcase, which contributes not only to its overall weight savings but also to cooling efficiency. This is crucial during extended use, as it ensures the engine maintains its optimal operating temperature.

Another distinguishing characteristic of the Zenoah G3200 is its integrated electronic ignition system. This system offers quick starts and dependable reliability, reducing the frustrating experiences often associated with traditional ignition systems. Coupled with its high-performance spark plug, the G3200 provides consistent ignition and operational durability, even under varying weather conditions.

The engine is equipped with a microfinned cylinder, which increases the heat dissipation capability. This feature is essential for ensuring that the engine operates effectively over long periods, minimizing the risk of overheating. The carburetor, which is tuned for both power and fuel efficiency, allows users to achieve the optimal air-fuel mixture easily.

With its versatile application range, the Zenoah G3200 is also praised for its ease of maintenance. The design facilitates simple access to key components, simplifying the process of tune-ups and repairs. Overall, the Zenoah G3200 stands as a testament to cutting-edge engineering, embodying reliability, performance, and user-friendliness, making it a top choice for both hobbyists and professionals alike.