3. Symbols on the machine
WARNING
For safe operation and maintenance, symbols are carved in relief on the machine.
According to these indications, please be careful not to take a mistake.
(a). The port to refuel the "MIX GASOLINE" Position: Fuel cap
(b). The port to refuel the chain oil Position: Oil cap
(c). Put the switch to the "O" position, immediately the engine stops. Position:
(d). If you pull out the choke knob, you can set the choke as a cold start mode.
Position:
(e). The screw under the "H" stamp is The
The screw under the "L" stamp is The
The screw at the left of the "T" stamp is the Idle adjustment screw.
Position: Left side of the rear handle
(f). It shows the directions that the chain brake is released (for the white arrow) and activated (for the black arrow).
Position: Front of the chain cover
(g) If you turn the rod by screwdriver follow the arrow to the "MAX" position, the chain oil flow more, and if you turn to the "MIN" position, less.
Position: Bottom of the power unit
G3200/G3200EZ | G3200/G3200EZ |
IMPORTANT ENGINE INFORMATION
THIS ENGINE CONFORMS TO U.S. EPA PH1 FOR SMALL
COMPLIANCE PERIOD : CATEGORY A
ENGINE FAMILY : 7KZXS.0324RS ; EM*1
ENGINE DISPLACEMENT : 32cc
REFER TO OWNER’S MANUAL FOR MAINTE- NANCE, SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED:
Information du moteur importante
Ce moteur est conforme aux reglements U.S. EPA PH1 pour les petits moteurs du offroad.
Période de l'acquiescement : CATEGORY A
Type de moteur : 7KZXS.0324RS ; EM*1
Cylindree du moteur : 32cc
Se fererer au manuel de l’utilisateur pour les specifications d’entretien et les reglages.
FABRIQUE PAR:
ZENOAH CO.,LTD. | ZENOAH CO.,LTD. |
|
|
USE JASO FC OR ISO EGC GRADE 50:1 OIL | Utilise JASO FC ou ISO EGC 50:1 Huile |
| |
*1: The initial number will be changed every year | *1: Le nombre initial changera chaque année de | ||
of manufacturing. | la fabrication. | 5 | |
|
|