Zenoah G3200 manual Operation, Starting the Engine

Page 13

7. Operation

F7-1

(1)

(2)

F7-2

(1)

F7-3 (1)

F7-4 (1)

(2)

(3)

F7-5

WARNING

It is very dangerous to run a chainsaw that mounts broken parts or lacks any parts.

Before starting engine, make sure that all the parts including bar and chain are installed properly.

■STARTING THE ENGINE

1.Fill fuel and chain oil tanks respectively, and tighten the caps securely.

(1) Fuel

(2) Chain oil

2. Set the switch to “I” position.

(1) Switch

3.Continuously push the priming bulb until fuel comes in the bulb.

(1) Priming bulb

4.Pull out the choke knob completely to close the choke.

(1) Choke knob (2) Close (3) Open

NOTE

When restarting immediately after stopping the engine, you need not to pull out the choke knob.

5.While holding the saw unit securely on the ground, pull the starter rope vigorously.

WARNING

Do not start the engine while the chain saw hangs in one hand. The saw chain may touch your body. This in very dangerous.

 13 

Image 13

Contents 848-C3A-93A1 G3200 G3200EZPage Contents Safety FirstG3200 / G3200EZ Power unit SpecificationsParts location  4 Utilise Jaso FC ou ISO EGC 501 Huile Symbols on the machine 6  For safe operation 7  Kickback Safety Precautions for Chain SAW Users 8  Installing guide bar and saw chainF5-4 F5-5 F5-6 Nut assembly Chain cover LoosenG3200EZ Projection a Projection B Projection CF5-7 F5-8 Nut assembly Chain cover Lever Proper tension, No gap 10  Loosen Bar protectorHOW to MIX Fuel When using RedMax/ZENOAH genuine oilFuel and Chain oil Recommended Mixing Ratio Gasoline 50OILFor Your Engine LIFE, Avoid Fueling the Unit 12  Chain OILStarting the Engine OperationAdjusting the Carburetor Rich 2 Lean 3 Chain oil flow adjustingF7-6 F7-7  14 Chain Brake Stopping the Engine F7-11 F7-12 16  Guard Against Kickback F8-1 Sawing 17  Felling a Tree F8-2 F8-2 18  Log hanging off the ground F8-4 F8-3 F8-4 F8-5 F8-6 Log lying on the ground F8-3Cutting Limb of Fallen Tree F8-5  19 Maintenance After Each USE MaintenanceRCJ-7Y Spark arrester F9-8 F9-9 F9-10Exhaust port Muffler exhaust vent Cylinder exhaust port SprocketF10-1 F10-2 Maintenance of Saw Chain and Guide BarSAW Chain  23 Guide BAR F10-3 F10-4Ruler Gap No gap Chain tilts  24 Case 2. Lack of power/Poor acceleration/Rough idling Troubleshooting GuideCase 3. Oil does not come out  25 Disposal Storage 26   27  Parts list 28  Power Unit S/N 600001 and up 29   30   31   32  Power Unit S/N 632994 and up 33   34   35   36  G3200/G3200EZ 37  Accessories G3200 600001 and up G3200EZ 632994 and upChain Saws Limited Warranty Garantie limitée des tronçonneuses Zenoah AMERICA, INC

G3200 specifications

The Zenoah G3200 stands as a quintessential power tool in the realm of engine technology, especially favored in the world of remote-controlled (RC) aircraft and various small machinery applications. Known for its exceptional engineering, the G3200 is a lighter, high-performance engine that combines power, efficiency, and reliability.

One of the main features of the Zenoah G3200 is its 32cc displacement, which allows it to deliver robust power without significantly increasing weight. This makes it an ideal choice for hobbyists looking for a balance between performance and maneuverability in their RC crafts. With an output of approximately 2.5 horsepower, the engine is capable of powering various models ranging from airplanes to helicopters and even lawn equipment.

The G3200 utilizes a high-efficiency, reed valve induction system. This technology optimizes airflow into the combustion chamber, enhancing throttle response and overall performance. The engine is designed with a lightweight aluminum crankcase, which contributes not only to its overall weight savings but also to cooling efficiency. This is crucial during extended use, as it ensures the engine maintains its optimal operating temperature.

Another distinguishing characteristic of the Zenoah G3200 is its integrated electronic ignition system. This system offers quick starts and dependable reliability, reducing the frustrating experiences often associated with traditional ignition systems. Coupled with its high-performance spark plug, the G3200 provides consistent ignition and operational durability, even under varying weather conditions.

The engine is equipped with a microfinned cylinder, which increases the heat dissipation capability. This feature is essential for ensuring that the engine operates effectively over long periods, minimizing the risk of overheating. The carburetor, which is tuned for both power and fuel efficiency, allows users to achieve the optimal air-fuel mixture easily.

With its versatile application range, the Zenoah G3200 is also praised for its ease of maintenance. The design facilitates simple access to key components, simplifying the process of tune-ups and repairs. Overall, the Zenoah G3200 stands as a testament to cutting-edge engineering, embodying reliability, performance, and user-friendliness, making it a top choice for both hobbyists and professionals alike.