SA3 SA4 SA5 SA6, Cutting a pillowed log | Zenoah G3100T instruction

8. Sawing

SA3

SA4

SA5

SA6

of bending direction to prevent the guide bar from being caught in the cutaway.

●Cutting an unpillowed log

Saw down halfway, then roll the log over and cut from the opposite side. (SA3)

●Cutting a pillowed log

In the area A in the picture right above, saw up from the bottom one-third and finish by sawing down from the top. In the area B, saw down from the top one-third and finish by sawing up from the bottom. (SA4)

●Limbing a felled tree

WARNING

Be alert to the spring back of a cut limb.

First check which way the limb is bent. Then make a shallow cut into the compressed side to prevent the limb from being torn. Cut through from the tensed side. (SA5)

●Pruning

WARNING

1.Do not use an unstable foothold or a stepladder.

2.Do not overreach.

3.Do not cut above shoulder height.

4.Always use both hands to grip the saw.

Cut up from the bottom, finish down from the top. (SA6)

16 