3. Symbols on the machine
IMPORTANT ENGINE INFORMATION THIS ENGINE CONFORMS TO US EPA PH1 FOR SMALL
ENGINE FAMILY: 3E8XS.0304TH
ENGINE DISPLACEMENT: 30.1cm3
MANUFACTURED:
REFER TO OWNER'S MANUMAL FOR MAINTE- NANCE SPECIFICATIONS AND ADJUSTMENTS.
MADE IN ITALY
THIS SAW IS FOR TRAINED TREE
WARNING! SERVICE OPERATORS ONLY. SEE INSTRUCTION HANDBOOK!
For safe operation and maintenance, symbols are on the machine. According to these indications, please be careful not to take a mistake.
(a). The port to refuel the “MIX GASOLINE” Position: fuel tank cap
(b). The port to refuel the “CHAIN OIL” Position: oil cap
(c). The indication regarding the switch.
Flipping the engine switch to the “O” (STOP) direction, the engine stops.
Position: upper part of the unit
(d). The indication regarding the choke.
Pulling out the choke knob, the choke closes. Position: front of the chain cover
(e). The position of
The position of idle adjusting screw Position: Front of the chain cover
(f). It shows the directions that the chain brake is released (for the white arrow) and activated (for the black arrow).
Position: Front of the chain cover
INFORMATION IMPORTANTE CONCERNANT LE MOTEUR
CE MOTEUR CONFORMC AUX NORMCS U.S. EPA
PH1 POUR LES PETITS MOTEURS
TYPE DE MOTEUR: 3E8XS.0304TH
CYLINDRÉE DU MOTEUR: 30,1cm3
MANUFACTURÉ:
SE RÉFÉRER AU MANUEL DE L'UTILISATEUR POUR LESSPÉCIFICATIONS D'ENTRETIEN ET LES RÉGLAGES.
MADE IN ITALY
Cette tronçonneuse est réservée à
ATTENTION! l’usage exclusif de bûcherons expérimentés. Voir Manuel d’utilisation !
5