Connecting to a TV
Before connecting
Refer also to the instruction manual of the TV.
When you connect the machine to the TV, be sure to turn off the power and unplug both the units from the wall
outlets before making any connections.
Connect the machine to the TV directly. If you connect the machine to a VCR, TV/VCR combination, or video selector,
the playback picture may be distorted as DVD videos are
copy protected.
Note that one video connection cable for monitor out is supplied..
Automatically switched to the TV set A/V mode(DVD, Video)
Do not change to Video Aspect Ratio.
Connecting to Audio/Video Equipment
Before connecting
Refer also to the instruction manual of each component to be connected.
When you connect the machine to audio/video equipment, be sure to turn off the power and unplug all the units from the wall outlets before making any connections.
Connect the plugs securely.
Getting
Connecting to a TV without Color Difference Inputs
SCART Specification : Composite and Component Video output(DVD, Video)Audio L/R Output(DVD only)
for EU version: optional
Started
| Audio/Video |
|
| |
| connection |
|
| |
| cable |
|
| S Video |
|
|
|
| |
|
|
|
| connection cable |
To audio output | To video output | To audio input | To video input | To S video |
|
|
|
| input |
If the TV or monitor is equipped with an S video input, make the S video connection in addition to the normal video connection. The S video connection will provide higher quality picture playback.
Connecting to a TV with Color Difference Inputs
If the TV or monitor is equipped with the color difference inputs, select the connection on the above.
Connecting to these inputs allows you to enjoy higher quality picture playback compared to the above connection.
Notes
Actual labels for color difference inputs may vary depending on the TV manufacturer (ex. Y/Cb/Cr,
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.
Caution
You may need to maximize the volume of the TV speaker(s) when you carry out steps in "Speaker Setup".
Be sure to turn down the volume of the TV speaker(s) before changing the TV source input and using the TV speaker(s) as a normal TV speaker(s).
12 | 13 |