Speaker Setup
Before operating your machine, you need to set up the speaker configuration and the delay time from the listening position to each speaker.
Speaker Setup
Turning on/off the digital output
SETUP | 1. Press SETUP button while the disc is |
|
stopped.
The setup main menu appears on the display.
SET UP
TV DISPLAY | NORMAL/PS |
TV TYPE | NORMAL/LB |
OSD LANG | WIDE |
DYNAMIC |
|
SPEAKER SETUP |
|
VIDEO OUTPUT |
|
AUDIO |
|
SUBTITLE |
|
2. Press 
button to select the “SPEAKER SETUP”, then press ENTER to move the speaker setup menu.
The speaker setting menu appears on the display.
SET UP
TV DISPLAY
TV TYPE
OSD LANG
DYNAMIC
SPEAKER SETUP
VIDEO OUTPUT
AUDIO
SUBTITLE
3. Press 
button to select the “DIGITAL OUT”, then press 
to confirm.
SPEAKER SETUP
DIGITAL OUT | OFF |
FRONT POS. | ON |
CENTER POS. |
|
REAR POS. |
|
TEST TONE |
|
MAIN PAGE |
|
4. Press 
button to select the “ON” or “OFF”, then press ENTER to confirm.
SPEAKER SETUP
DIGITAL OUT | OFF |
FRONT POS. | ON |
CENTER POS. |
|
REAR POS. |
|
TEST TONE |
|
MAIN PAGE |
|
Adjusting Each Speaker's Position
If each speaker’s position is disabled on the TV screen, select
DIGITAL OUT OFF.
1. Press 
button to select the “FRONT POS.” while the “SPEAKER SETUP” menu is displayed on the TV screen, then press 
to confirm.
The front speaker position value appears on the display.
SPEAKER SETUP
DIGITAL OUT |
|
FRONT POS. | 5 FT / 1.5 M |
CENTER POS. |
|
REAR POS. |
|
TEST TONE |
|
MAIN PAGE |
|
2. Press 
button to select the speaker’s distance, then press ENTER to confirm.
The speaker’s distance can be adjusted between 5 FT / 2.5m and 30 FT / 9.2 m.
SPEAKER SETUP
DIGITAL OUT |
|
FRONT POS. | 8 FT / 2.5 M |
CENTER POS. |
|
REAR POS. |
|
TEST TONE |
|
MAIN PAGE |
|
3.Repeat step 1~2 to adjust other speaker’s position.
4. To stop the SPEAKER SETUP
Press 
button to select “MAIN PAGE”, then press ENTER button.
SETUP | 5. To exit the SETUP. |
|
Press SETUP button.
Adjusting Each Speaker's Relative
Volume Balance – Test Tone
If headphones are connected, remove the headphones.
1.Press 
button to select the “TEST TONE” while the “SPEAKER SETUP” menu is displayed on the TV screen, then press 
button to move.
SPEAKER SETUP
DIGITAL OUT |
|
FRONT POS. |
|
CENTER POS. |
|
REAR POS. |
|
TEST TONE | ON |
| OFF |
MAIN PAGE |
|
2.Press 
button to select the “ON”, then press ENTER to confirm.
SPEAKER SETUP
DIGITAL OUT |
|
FRONT POS. |
|
CENTER POS. |
|
REAR POS. |
|
TEST TONE | ON |
| OFF |
MAIN PAGE |
|
Each speaker emits the test tone (pink noise) in the following order:
SubWoofer
(Subwoofer)
3. Press CH.LEVEL repeatedly to select the speaker, then press 
to raise or lower the volume level until you have an equal volume balance with the other speakers at your listening position. The volume level can be adjusted between
5.To exit the DIGITAL OUT on/off. Press 
button.
4.To stop the SPEAKER SETUP
Press 
button to select “MAIN PAGE”, then press ENTER button.
6.To exit the SETUP. Press SETUP button.
SETUP
4. To stop the test tone.
Press SETUP button to exit TEST TONE.
18 | 19 |