Troy-Bilt 630CN manual MaintenanceandStorage, Keepchildren and pets away

Page 4

4.Exercisecautionto avoid slipping or fall- ing.

5.If the unit should start to vibrate aonor- really,stop the enQne. disconnect the spark plug wire and prevent it from touch- ing the spark plug, and check immediately for the cause. Vibration is generally a warning of trouble.

B. Stop the enQhe, disconnectthe spark plugwire and prevent it from touching the spark plug, whenever you leavethe oper- ating position, before uncloggingthe trees. or when making any repairs, adjustments or inspections.

7.Takeall possible precautions when leav- ing the machine unattended. Stop the en- gine. Disconnect the spark plug wire and move it awayfrom the spark plug. Besure that both wheelsare inthe Wheel Drive po- sition.

8.Before cleaning, repairing, or inspect- ing, stop the engine and makecertain all mowng parts havestopped. Disconnect the spark plug wire and prevent itfrom touching the spark plug to preventacci- dental starting.

9.The flap on the tine hood must bedown when operating the tiller.

tO. Neveruse the tiller unless proper guards, plates, or other safety protective devices are in place.

11.Do not run the engine m an enclosed area. Engineexhaust contains caroon monoxide gas. a deadly poison that is odorless, colorless, and tasteless.

12.Keepchildren and pets away.

13.Never operatethe tiller underengine powerif the wheels are in the Freewheel position. In the Freewheelposition, the wheelswill not hold the tiller backand the revolving Linescould propelthe tiller rapid- ly,possibly causingloss of control. Always engagethe wheels with the wheel drive pins in the Wheel Drive position before starting the engine or engagingthe tines/wheelswith the Forward Clutch Bail (all models_or the ReverseClutch control (Models 634F/634Bonly).

14.Be aware that the tiller may unex- pectedlybounceupwardor jumpforward if the tines shouldstrike extremely hard packedsoil, frozenground,or buried ob- stacles like large stones, roots, or stumps.

If in doubtaboutthe tilling conditions,al- ways usethe followingoperatingprecau- tionsto assistyou in maintaining control of the tiller:

a.Walk behindand to one side of the tiller, usingone handon the handle bars Relax yourarm, but usea secure handgrip.

b.Use shallower depthregulator settings, workinggradually deeper with each pass.

c.Use slower engine speeds.

d.Clear the tilling area of all large stones, rootsor other debris.

e.Avoid using downwardpressureon the handlebars. If need be. use slight upward pressureto keep the tines from diggingtoo deeply.

f.Beforecontactinghard packedsoil at the end of a row. reduceengine speed and lift the handlebarsto raise the tines out of the soil.

g.In anemergency,stopthe tines and wheels byreleasing whichever clutchcontrolis engaged.Do not attemptto restrain the tiller.

15.Do not overloadthe tiller'scapacity by attempting to till too deeply at too fast a rate.

16.Neveroperatethe tiller at high trans- port speeds on hard or slippery surfaces Look behindand use care when backing up

17.Do not operatethe tiller ona slopethat is too steep for safety. When on slopes, slow down and makesure you have good footing. Never permit the tiller to free- wheel down slopes.

18.Neverallow bystanders nearthe unit.

19.Only useattachments andaccessories that are approved by the manufacturer o1 the tiller.

20.Usetiller attachmentsand accessories when recommended.

21.Neveroperatethe tiller without good visibility or light.

22.Neveroperatethe tiller if you aretired: or underthe influence of alcohol, drugs or medication.

23.Operatorsshall not tamper with the en- gine-governor settings onthe machine: the governor controls the maximum safe operating speed to protect the engine and all moving parts from damagecaused by overspeed. Authorized service shall be sought if a problem exists.

24.Do not touch engine parts which may behot from operation. Let parts cool down sufficiently.

25.Pleaseremember:Youcanalways stop the tines and wheels by releasingthe For- ward Clutch Bailor on Models 634Fand 634B the ReverseClutch control. _which- ever control is engaged), or by movingthe Egnitionswitch and/orthrottle control lever on the engineto "OFF"or "STOP".

26.To load or unloadthe tiller, seethe in- structions in Section4 of this Manual.

27.Useextreme caution when reversing or pulling the machinetowards you.

28.Start the enginecarefully according to instructions and with feet well away from the tines.

29.Neverpickupor carry amachinewhile the engine is running.

MaintenanceandStorage

1.Keepthe tiller, attachmentsand acces- sories in safe working condition.

2.Checkall nuts bolts, and screws at

ervalsfor proper tightness to ee sure the equipment is in safe working condition.

3.Neverstore the tiller with fuel in the fuel tank insidea building where ignition sourc-

esare presentsuchas hot water andspace heaters,furnaces, clothes dryers, stoves, electric motors, etc.L Allow the engineto COOlBeforestoring the unit in any enclo- sure.

4.To reducethe chances of a fire hazard. keepthe enginefree of grass, leaves,or ex- cessivegrease.

5.Store gasoline in a cool. well-ventilated area. safelyaway from any spark- or flame-producing equLpment. Store gaso- line in an approved container, safely away from the reach of children.

6.Refedto the Maintenancesections of

this Manual and the separateEngineOwn- er'sManualfor instructions if the unit isto ee stored for an extendedperiod

7.Neverperform maintenance while the engineis runmng orthe spark plug wire is connected,except when specifically in- structed to do so.

8.Ifthefueltankhastobedrained dothis outdoors.

Image 4
Contents Form no -10594B 11/5/02Tableofcontents Safety SafetyAlert SymbolTraining PreparationMaintenanceandStorage Keepchildren and pets awayDecals OperatingSymbolsStartingStabilization Messageonengine Assembly LoosePartsListInstall Forward Clutch CableInstall Reverse Clutch Cable Models 634F & 634B only BailCheckhardware 31bY I Uiieuklevel UIIbY I AUU Muiuh UIL Check AIR PressureFeaturesandcontrols Wheel Drive PinsIntroduction Engine ControlsForwardclutchbail Depth Regulator Lever Handlebar Height AdjustmentReverseclutchcontrol BREAK-INOPERATION OperationStartingandstopping Stoppingthe Engineand Tiller Operatingthe TillerStoppingtheTillerandEngine Tilling Depths Let theTiller Do the Work AvoidMakingFootprintsPreparingSeedbeds CultivatingPowerComposting Tilling AcrossSlopesWithout UsingTerracesHorizontalTillingTilling OnSlopes Readthe following recommendati ns beforetilling on slopesThetiller TerraceGardeningMaintenance Transmission Gearoil ServiceChecktire Pressure CheckforoilleaksRemoving4nstallinga Tine Assembly BolotinesTo Drain the TransmissionGear Oil Removing4nstallinga Single TineCheckingandadjusting ReplacementBelt InformationForwarddrivebelttension To CheckForwardBelt TensionCheckingandadjustingre EnginecleaningAircleanerservice EngineoilserviceSparkplugservice ThrottleleveradjustmentOFF-SEASONSTORAGE To Changethe EngineOilTroubleshooting Problempossiblecause CorrectionMODELS630C,634F & 634B Partslist Description PartnoMODELS630C, 634F & 634B \25Description PARTNO.DESCRIPTIONAForModel6300 BForModel634F CForModel6348 Partno DescriptionGW-1224-4 GW-13250 ShimSetIncLthefollowingshimsGW-9512 1909950 Retainer,SnapRingShim,0.062thick Shim,0.030thickHexHd. FlangeScrew,5/16-18x 5/8,Gr LEFT-HANDTINE RIGHT-HANDTINE MODELS630C, 634F & 634B Partno Description TROY-BILT Tiller Lifetime Limited Warranty TROY-BILT LLC, P.O. Box 361131, Cleveland, Ohio 44136-0019