Montgomery Ward TMO-39084A, TMO-39083A Hex bolt. See . Tighten securely, Side Shield Installation

Ball Knob

I	(C) Hex Bolt
	(A)
~

Hairpin

Cotter'

(E),

Flat

Washer

-(8)

e~

#)

Depth Bar

Insert clevis pin (0) through the tine shield

and depth bar assemblies. Secure with hairpin~cotter

(E). See figure 4.

3. Insert hex bolt (A) into the upper hole of the

depth bar assembly. Place flat washer (8) onto

the hex bolt and thread ball knob (C) onto the

Clevis

Shield Pin (0)

Assembly

FIGURE 4.

FIGURE 5.

--Assembly.~

~

hex bolt. See figure 4. Tighten securely.

SIDE SHIELD INSTALLATION

Mount s,de shields (AB) over the weld bolts on the end cover assemblies. Secure with belleville

-washers (P) and hex nuts (Q). See figure 5.

HANDLE ASSEMBLY

NOTE

Left and right is determined from

the operator's position, standing behind the tiller.

1. Place right handle (AA) in position on the right side of the tiller. Insert hex bolts (F) through belleville washers (G), handle and mounting

4bracket. See figure 6. Secure with hex nuts (I) and lock washers (H).

2.Repeat step 1 for left handle (AE) on the left side of the tiller.

FIGURE 6

5

11~2.