Honda Power Equipment FG110 Servicing Your Tiller, Importance of Maintenance, Maintenance Safety

Page 12

SERVICING YOUR TILLER

THE IMPORTANCE OF MAINTENANCE

Good maintenance is essential for safe, economical, and trouble-free operation. It will also help reduce air pollution.

WARNING

Improperly maintaining this tiller, or failure to correct a problem before operation, can cause a malfunction in which you can be seriously hurt or killed.

Always follow the inspection and maintenance recommendations and schedules in this owner’s manual.

To help you properly care for your tiller, the following pages include a maintenance schedule, routine inspection procedures, and simple maintenance procedures using basic hand tools. Other service tasks that are more difficult, or require special tools, are best handled by professionals and are normally performed by a Honda technician or other qualified mechanic.

The maintenance schedule applies to normal operating conditions. If you operate your tiller under severe conditions, such as sustained high-load or high-temperature operation, or use it in unusually wet or dusty conditions, consult your servicing dealer for recommendations applicable to your individual needs and use.

Remember that your authorized Honda servicing dealer knows your tiller best and is fully equipped to maintain and repair it.

To ensure the best quality and reliability, use only new, genuine Honda parts or their equivalents for repair and replacement.

Maintenance, replacement, or repair of the emission control devices and systems may be performed by any engine repair establishment or individual, using parts that are “certified” to EPA standards.

MAINTENANCE SAFETY

Some of the most important safety precautions follow. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.

WARNING

Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in the owner’s manual.

Safety Precautions

•Make sure the engine is off before you begin any maintenance or repairs. This will eliminate several potential hazards:

‰Carbon monoxide poisoning from engine exhaust. Be sure there is adequate ventilation whenever you operate the engine.

‰Burns from hot parts. Let the engine and exhaust system cool before touching.

‰Injury from moving parts. Do not run the engine unless instructed to do so.

•Read the instructions before you begin, and make sure you have the tools and skills required.

•To reduce the possibility of fire or explosion, be careful when working around gasoline. Use only a nonflammable solvent, not gasoline, to clean parts. Keep cigarettes, sparks, and flames away from all fuel-related parts.

12

ENGLISH

Page 11 Page 13
Image 12
Page 11 Page 13
Contents FEW Words about Safety ContentsIntroduction EnglishTiller Safety Important Safety InformationAttachments and Modifications Important Message to EmployersTiller Safety Safety Label LocationsProduct Identification Plate Controls & Equipment Component & Control LocationsControls & Equipment Description of ControlsTransport Wheels Carrying HandleRecoil Starter Grip Drag BarBefore Operation Are YOU Ready to Operate the TILLER?Is Your Working Area READY? Is Your Tiller Ready to GO?Safe Operating Precautions Drag Bar InstallationMoving the Tiller Operation Starting The EngineTine Installation Tiller OperationOperating Tips Importance of Maintenance Maintenance SafetySafety Precautions Servicing Your TillerMaintenance Schedule Servicing Your TillerEngine Engine Oil Level CheckEngine Oil Change Engine Oil RecommendationsAir Filter Cleaning Air Filter CheckSpark Plug Service An incorrect spark plug can cause engine damageCarburetor Adjustment Cooling Fin InspectionThrottle Cable Inspection Fuel System RefuelingFuel Recommendations Fuel Filter and Fuel Tank Cleaning Fuel Tube InspectionTransmission Lubrication Importance of Proper Assembly Important Safety PrecautionsSET-UP SET-UP UnpackingAdding OIL Before OperationSTORAGE-TRANSPORTING Storage PreparationStorage Precautions STORAGE-TRANSPORTINGRemoval from Storage TransportingTaking Care of Unexpected Problems LOW Power or Engine Speed WON’T IncreaseEngine will not Start Technical & Consumer Information Serial Number LocationsCarburetor Modifications for High Altitude Operation Specifications Technical & Consumer InformationEmissions Control System Information Tuneup FaaaCustomer Service Information Consumer InformationFind an Authorized Honda Servicing Dealer in Your Area Honda PublicationsMini-Tiller FG110

Honda Mini-Tiller, FG110 specifications

The Honda Power Equipment FG110 Mini-Tiller is a compact and versatile gardening tool designed to simplify soil preparation for gardeners and landscapers alike. With its robust engineering, user-friendly features, and advanced technologies, the FG110 stands out as an essential machine for both home users and professionals.

One of the main features of the FG110 is its lightweight design, weighing in at just 29 pounds. This makes it easy to maneuver around the garden, even in tight spaces. The mini-tiller boasts a powerful Honda 4-stroke engine that provides reliable performance without the need for mixing oil and gas. The fuel-efficient engine ensures longer run times, allowing users to tackle larger areas without having to frequently refuel.

The FG110 is equipped with a set of durable tines that are designed to penetrate tough soil effortlessly. With a working width of 9 inches and a tilling depth of up to 8 inches, it effectively turns soil, aerating the ground and promoting healthier plant growth. The adjustable tilling width allows for greater flexibility, letting users customize their tilling experience based on specific gardening needs.

This mini-tiller features a low-vibration design that ensures comfort during extended use. The ergonomically designed handle can be easily adjusted to accommodate users of various heights, offering better control and reducing fatigue. Moreover, the FG110 is equipped with a convenient transport wheel, making it easier to move from one location to another without straining the body.

Another noteworthy aspect of the Honda FG110 is its reliability and maintenance-friendly design. The air-cooled, 4-stroke engine is easy to maintain, and the overall construction of the tiller is built to withstand challenging conditions. The quick-start system allows users to start the engine with minimal effort, getting them to work faster.

In summary, the Honda FG110 Mini-Tiller combines power, efficiency, and ease of use into a compact package ideal for any gardening enthusiast. Its lightweight design, powerful engine, versatile tines, and user-friendly features make it an excellent choice for both residential and professional gardening tasks, ensuring that soil preparation is no longer a daunting chore but a straightforward and enjoyable experience. With Honda's reputation for quality and durability, the FG110 is a reliable companion for a thriving garden.
Top Page Image Contents