Honda Power Equipment Honda Mini-Tiller, FG110 Cooling Fin Inspection, Throttle Cable Inspection

Page 17

SERVICING YOUR TILLER

Cooling Fin Inspection

Inspect the engine cooling fins [1]. Clean out any dirt and

[1]

debris so air can flow across the cooling fins.

1.Loosen the 5 mm hex bolt, then remove the fan cover.

2.Remove all dirt and debris from the cooling fins.

3.Install the fan cover and tighten the 5 mm hex bolt securely.

Throttle Cable Inspection

Verify that the throttle lever [1] operates smoothly, releases properly, and the throttle cable is undamaged. If there is visible damage, or if the throttle lever does not operate smoothly or release properly, take your tiller to your authorized Honda servicing dealer.

Carburetor Adjustment

A tachometer is required to adjust the idle speed. If you do not have one, have your authorized Honda servicing dealer adjust the idle speed.

1.Start the engine outdoors, and allow it to warm up to normal operating temperature.

2.Turn the throttle stop screw [1] to obtain a stable idle, below the speed at which the tiller tines begin to turn.

Standard Idle Speed: 3,100 ± 200 rpm

[1]

CHOKE LEVER

[1]

ENGLISH

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Contents FEW Words about SafetyEnglish IntroductionImportant Safety Information Tiller SafetyAttachments and Modifications Important Message to EmployersProduct Identification Plate Tiller SafetySafety Label Locations Component & Control Locations Controls & EquipmentDescription of Controls Controls & EquipmentCarrying Handle Transport WheelsRecoil Starter Grip Drag BarAre YOU Ready to Operate the TILLER? Before OperationIs Your Working Area READY? Is Your Tiller Ready to GO?Moving the Tiller Safe Operating PrecautionsDrag Bar Installation Starting The Engine OperationOperating Tips Tine InstallationTiller Operation Maintenance Safety Importance of MaintenanceSafety Precautions Servicing Your TillerServicing Your Tiller Maintenance ScheduleEngine Oil Level Check EngineEngine Oil Change Engine Oil RecommendationsAir Filter Check Air Filter CleaningAn incorrect spark plug can cause engine damage Spark Plug ServiceThrottle Cable Inspection Carburetor AdjustmentCooling Fin Inspection Fuel Recommendations Fuel SystemRefueling Fuel Tube Inspection Fuel Filter and Fuel Tank CleaningTransmission Lubrication SET-UP Importance of Proper AssemblyImportant Safety Precautions Unpacking SET-UPAdding OIL Before OperationStorage Preparation STORAGE-TRANSPORTINGSTORAGE-TRANSPORTING Storage PrecautionsRemoval from Storage TransportingEngine will not Start Taking Care of Unexpected ProblemsLOW Power or Engine Speed WON’T Increase Carburetor Modifications for High Altitude Operation Technical & Consumer InformationSerial Number Locations Emissions Control System Information SpecificationsTechnical & Consumer Information Faaa TuneupConsumer Information Customer Service InformationFind an Authorized Honda Servicing Dealer in Your Area Honda PublicationsMini-Tiller FG110

Honda Mini-Tiller, FG110 specifications

The Honda Power Equipment FG110 Mini-Tiller is a compact and versatile gardening tool designed to simplify soil preparation for gardeners and landscapers alike. With its robust engineering, user-friendly features, and advanced technologies, the FG110 stands out as an essential machine for both home users and professionals.

One of the main features of the FG110 is its lightweight design, weighing in at just 29 pounds. This makes it easy to maneuver around the garden, even in tight spaces. The mini-tiller boasts a powerful Honda 4-stroke engine that provides reliable performance without the need for mixing oil and gas. The fuel-efficient engine ensures longer run times, allowing users to tackle larger areas without having to frequently refuel.

The FG110 is equipped with a set of durable tines that are designed to penetrate tough soil effortlessly. With a working width of 9 inches and a tilling depth of up to 8 inches, it effectively turns soil, aerating the ground and promoting healthier plant growth. The adjustable tilling width allows for greater flexibility, letting users customize their tilling experience based on specific gardening needs.

This mini-tiller features a low-vibration design that ensures comfort during extended use. The ergonomically designed handle can be easily adjusted to accommodate users of various heights, offering better control and reducing fatigue. Moreover, the FG110 is equipped with a convenient transport wheel, making it easier to move from one location to another without straining the body.

Another noteworthy aspect of the Honda FG110 is its reliability and maintenance-friendly design. The air-cooled, 4-stroke engine is easy to maintain, and the overall construction of the tiller is built to withstand challenging conditions. The quick-start system allows users to start the engine with minimal effort, getting them to work faster.

In summary, the Honda FG110 Mini-Tiller combines power, efficiency, and ease of use into a compact package ideal for any gardening enthusiast. Its lightweight design, powerful engine, versatile tines, and user-friendly features make it an excellent choice for both residential and professional gardening tasks, ensuring that soil preparation is no longer a daunting chore but a straightforward and enjoyable experience. With Honda's reputation for quality and durability, the FG110 is a reliable companion for a thriving garden.
Top Page Image Contents