Honda Power Equipment Honda Mini-Tiller, FG110 Storage-Transporting, Storage Preparation

Page 23

STORAGE PREPARATION

Proper storage preparation is essential for keeping your tiller trouble free and looking good. The following steps will help to keep rust and corrosion from impairing your tiller’s function and appearance, and will make the engine easier to start when you use the tiller again.

Cleaning

1.Wash the tiller, including the area around the tiller tines.

2.Wash the engine by hand, and be careful to prevent water from entering the air cleaner.

NOTICE

Using a garden hose or pressure washing equipment can force water into the air cleaner. Water in the air cleaner will soak the filter and can enter the carburetor or engine, causing damage.

3.Water on a hot engine can cause damage. If the engine has been running, allow it to cool for at least 1/2 hour before washing.

4.If using a garden hose or pressure washing equipment to clean the tiller, be careful to avoid getting water into controls and cables, or anywhere near the engine air cleaner or muffler opening.

5.After washing the tiller, wipe dry all accessible surfaces.

6.Start the engine outdoors, and let it run until it reaches normal operating temperature to evaporate any water remaining on the engine.

7.Stop the engine and allow it to cool.

8.After the tiller is clean and dry, touch up any damaged paint, and coat other areas that may rust with a light film of oil. Lubricate the throttle cable core with a silicone spray lubricant.

Fuel

Gasoline will oxidize and deteriorate in storage. Old gasoline will cause hard starting, and it leaves gum deposits that restrict the fuel system. If the gasoline in your tiller deteriorates during storage, you may need to have the carburetor and other fuel system components serviced or replaced.

The length of time that gasoline can be left in your fuel tank and carburetor without causing functional problems will vary with such factors as gasoline blend, storage temperatures, and whether the fuel tank is partially or completely filled. The air in a partially filled fuel tank promotes fuel deterioration. Very warm storage temperatures accelerate fuel deterioration. Fuel deterioration problems may occur within a few months, or

STORAGE-TRANSPORTING

even less if the gasoline was not fresh when you filled the fuel tank.

The Distributors Limited Warranty does not cover fuel system damage or engine performance problems resulting from neglected storage preparation.

You can extend fuel storage life by adding a gasoline stabilizer that is formulated for that purpose, or you can avoid fuel deterioration problems by draining the fuel tank and carburetor.

Adding Fuel Stabilizer To Extend Fuel Storage Life

When adding a fuel stabilizer, fill the fuel tank with fresh gasoline. If only partially filled, air in the tank will promote fuel deterioration during storage. If you keep a container of gasoline for refueling, be sure that it contains only fresh gasoline.

Add fuel stabilizer following the manufacturer’s instructions.

After adding a fuel stabilizer, run the engine outdoors for 10 minutes to be sure that treated gasoline has replaced the untreated gasoline in the carburetor.

Draining the Fuel Tank and Carburetor

1.Drain the fuel from the fuel tank to a suitable container (see page 19).

2.Start the engine (see page 10) and allow it to run until the engine stops.

WARNING

Gasoline is highly flammable and explosive.

You can be burned or seriously injured when handling fuel.

•Stop the engine and keep heat, sparks, and flames away.

•Handle fuel only outdoors.

•Wipe up spills immediately.

Engine Oil

Change the engine oil (see page 14).

Carburetor & Air Cleaner

Clean the air filter (see page 15) and move the choke lever to the CLOSED () position.

Engine Cylinder

Remove the spark plug (see page 16). Pour 1 ~ 3 cc of clean engine oil into the cylinder. Pull the starter rope several times to distribute the oil in the cylinder. Reinstall the spark plug. Pull the starter rope slowly until resistance is felt then return the starter grip gently. This closes the valves so moisture cannot enter.

ENGLISH

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Contents FEW Words about SafetyEnglish IntroductionImportant Message to Employers Tiller SafetyImportant Safety Information Attachments and ModificationsProduct Identification Plate Tiller SafetySafety Label Locations Component & Control Locations Controls & EquipmentDescription of Controls Controls & EquipmentDrag Bar Transport WheelsCarrying Handle Recoil Starter GripIs Your Tiller Ready to GO? Before OperationAre YOU Ready to Operate the TILLER? Is Your Working Area READY?Moving the Tiller Safe Operating PrecautionsDrag Bar Installation Starting The Engine OperationOperating Tips Tine InstallationTiller Operation Servicing Your Tiller Importance of MaintenanceMaintenance Safety Safety PrecautionsServicing Your Tiller Maintenance ScheduleEngine Oil Recommendations EngineEngine Oil Level Check Engine Oil ChangeAir Filter Check Air Filter CleaningAn incorrect spark plug can cause engine damage Spark Plug ServiceThrottle Cable Inspection Carburetor AdjustmentCooling Fin Inspection Fuel Recommendations Fuel SystemRefueling Fuel Tube Inspection Fuel Filter and Fuel Tank CleaningTransmission Lubrication SET-UP Importance of Proper AssemblyImportant Safety Precautions Before Operation SET-UPUnpacking Adding OILStorage Preparation STORAGE-TRANSPORTINGTransporting Storage PrecautionsSTORAGE-TRANSPORTING Removal from StorageEngine will not Start Taking Care of Unexpected ProblemsLOW Power or Engine Speed WON’T Increase Carburetor Modifications for High Altitude Operation Technical & Consumer InformationSerial Number Locations Emissions Control System Information SpecificationsTechnical & Consumer Information Faaa TuneupHonda Publications Customer Service InformationConsumer Information Find an Authorized Honda Servicing Dealer in Your AreaMini-Tiller FG110

Honda Mini-Tiller, FG110 specifications

The Honda Power Equipment FG110 Mini-Tiller is a compact and versatile gardening tool designed to simplify soil preparation for gardeners and landscapers alike. With its robust engineering, user-friendly features, and advanced technologies, the FG110 stands out as an essential machine for both home users and professionals.

One of the main features of the FG110 is its lightweight design, weighing in at just 29 pounds. This makes it easy to maneuver around the garden, even in tight spaces. The mini-tiller boasts a powerful Honda 4-stroke engine that provides reliable performance without the need for mixing oil and gas. The fuel-efficient engine ensures longer run times, allowing users to tackle larger areas without having to frequently refuel.

The FG110 is equipped with a set of durable tines that are designed to penetrate tough soil effortlessly. With a working width of 9 inches and a tilling depth of up to 8 inches, it effectively turns soil, aerating the ground and promoting healthier plant growth. The adjustable tilling width allows for greater flexibility, letting users customize their tilling experience based on specific gardening needs.

This mini-tiller features a low-vibration design that ensures comfort during extended use. The ergonomically designed handle can be easily adjusted to accommodate users of various heights, offering better control and reducing fatigue. Moreover, the FG110 is equipped with a convenient transport wheel, making it easier to move from one location to another without straining the body.

Another noteworthy aspect of the Honda FG110 is its reliability and maintenance-friendly design. The air-cooled, 4-stroke engine is easy to maintain, and the overall construction of the tiller is built to withstand challenging conditions. The quick-start system allows users to start the engine with minimal effort, getting them to work faster.

In summary, the Honda FG110 Mini-Tiller combines power, efficiency, and ease of use into a compact package ideal for any gardening enthusiast. Its lightweight design, powerful engine, versatile tines, and user-friendly features make it an excellent choice for both residential and professional gardening tasks, ensuring that soil preparation is no longer a daunting chore but a straightforward and enjoyable experience. With Honda's reputation for quality and durability, the FG110 is a reliable companion for a thriving garden.
Top Page Image Contents