Honda Power Equipment FG110, Honda Mini-Tiller specifications Transmission Lubrication

Page 20

SERVICING YOUR TILLER

TRANSMISSION LUBRICATION

The transmission is pre-lubricated at the factory.

At the beginning of each tilling season, or after every 25 hours of use during the season, the transmission should be filled with grease.

Replacement grease should be a high quality petroleum based NLGI #2 general purpose grease, usually available in disposable tubes at most hardware or automotive parts stores.

1. Place the tiller on the left side as shown.

2. Remove the lock pin [1] from the right side tine shaft by turning it UP [a] and pulling it OUT [b] as shown. Wearing heavy gloves, remove the right side outer tine [2] and inner tine [3].

[6]

3.Remove the fill hole screw and vent hole screw from ports [4] and [5] of the transmission.

4.Fill the transmission by using a grease gun [7] or grease applicator at the fill hole screw opening.

Push the gun or applicator against the opening to seal the nozzle of the gun [6] or applicator against

the casting embossment. Apply grease until[6] grease begins to come out of the top air vent hole

[5].

5.Reinstall the air vent screw and fill hole screw in ports [4] and [5].

6.Clean the tine shaft and place a few drops of oil on

the tine shaft before installing the tines.

7. Wear heavy gloves and reinstall the tines in the reverse order of removal.

8.Install the lock pin [1] through the round side of the tine shaft hole, then turn it over to lock it in place.

[4]

[1]

[b] [a]

[7]

[2)

[3]

[5]

20

ENGLISH

Page 19 Page 21
Image 20
Page 19 Page 21
Contents FEW Words about Safety ContentsIntroduction EnglishTiller Safety Important Safety InformationAttachments and Modifications Important Message to EmployersProduct Identification Plate Tiller SafetySafety Label Locations Controls & Equipment Component & Control LocationsControls & Equipment Description of ControlsTransport Wheels Carrying HandleRecoil Starter Grip Drag BarBefore Operation Are YOU Ready to Operate the TILLER?Is Your Working Area READY? Is Your Tiller Ready to GO?Moving the Tiller Safe Operating PrecautionsDrag Bar Installation Operation Starting The EngineOperating Tips Tine InstallationTiller Operation Importance of Maintenance Maintenance SafetySafety Precautions Servicing Your TillerMaintenance Schedule Servicing Your TillerEngine Engine Oil Level CheckEngine Oil Change Engine Oil RecommendationsAir Filter Cleaning Air Filter CheckSpark Plug Service An incorrect spark plug can cause engine damageThrottle Cable Inspection Carburetor AdjustmentCooling Fin Inspection Fuel Recommendations Fuel SystemRefueling Fuel Filter and Fuel Tank Cleaning Fuel Tube InspectionTransmission Lubrication SET-UP Importance of Proper AssemblyImportant Safety Precautions SET-UP UnpackingAdding OIL Before OperationSTORAGE-TRANSPORTING Storage PreparationStorage Precautions STORAGE-TRANSPORTINGRemoval from Storage TransportingEngine will not Start Taking Care of Unexpected ProblemsLOW Power or Engine Speed WON’T Increase Carburetor Modifications for High Altitude Operation Technical & Consumer InformationSerial Number Locations Emissions Control System Information SpecificationsTechnical & Consumer Information Tuneup FaaaCustomer Service Information Consumer InformationFind an Authorized Honda Servicing Dealer in Your Area Honda PublicationsMini-Tiller FG110

Honda Mini-Tiller, FG110 specifications

The Honda Power Equipment FG110 Mini-Tiller is a compact and versatile gardening tool designed to simplify soil preparation for gardeners and landscapers alike. With its robust engineering, user-friendly features, and advanced technologies, the FG110 stands out as an essential machine for both home users and professionals.

One of the main features of the FG110 is its lightweight design, weighing in at just 29 pounds. This makes it easy to maneuver around the garden, even in tight spaces. The mini-tiller boasts a powerful Honda 4-stroke engine that provides reliable performance without the need for mixing oil and gas. The fuel-efficient engine ensures longer run times, allowing users to tackle larger areas without having to frequently refuel.

The FG110 is equipped with a set of durable tines that are designed to penetrate tough soil effortlessly. With a working width of 9 inches and a tilling depth of up to 8 inches, it effectively turns soil, aerating the ground and promoting healthier plant growth. The adjustable tilling width allows for greater flexibility, letting users customize their tilling experience based on specific gardening needs.

This mini-tiller features a low-vibration design that ensures comfort during extended use. The ergonomically designed handle can be easily adjusted to accommodate users of various heights, offering better control and reducing fatigue. Moreover, the FG110 is equipped with a convenient transport wheel, making it easier to move from one location to another without straining the body.

Another noteworthy aspect of the Honda FG110 is its reliability and maintenance-friendly design. The air-cooled, 4-stroke engine is easy to maintain, and the overall construction of the tiller is built to withstand challenging conditions. The quick-start system allows users to start the engine with minimal effort, getting them to work faster.

In summary, the Honda FG110 Mini-Tiller combines power, efficiency, and ease of use into a compact package ideal for any gardening enthusiast. Its lightweight design, powerful engine, versatile tines, and user-friendly features make it an excellent choice for both residential and professional gardening tasks, ensuring that soil preparation is no longer a daunting chore but a straightforward and enjoyable experience. With Honda's reputation for quality and durability, the FG110 is a reliable companion for a thriving garden.
Top Page Image Contents