King Kutter 999995 manual Maintenance Safety

Page 20

NOTE: Do not allow the tractor engine or rotary tiller to bog down or stall. This causes undue wear and tear on the tiller and tractor. If this continues to happen reduce ground speed and raise tilling depth of rotary tiller. Never attempt to re- move objects from the rotor bar until the tractor has been shut down and the tiller tines have completely stopped.

WARNING

Never travel at a fast ground speed while using the tiller, this could damage it. Never attempt to turn the tractor or travel in reverse with the PTO engaged and the tiller in the ground. Always raise the tiller out of the ground when backing up or attempting to turn. Failure to due so may cause damage to the tiller.

STEP 8

After each use clean all debris from the tiller tines. Replace any missing or illegible safety decals. Inspect for any damaged or worn parts and replace before next use. Store rotary tiller in a dry environment.

MAINTENANCE

1).

Periodically check and maintain proper gear oil level.

2).

Every 8 hours, (1) grease "outboard hub", (2) PTO shaft universal joints, (3) PTO

 

shaft safety shield and (4) PTO telescoping surface.

 

NOTE: Use only a grade Type II tube grease.

 

NOTE: Do not grease the slip clutch assembly.

3).

Before each use check to make sure all safety shields are installed and working

 

properly.

4).

Check tiller tines for cracks and breaks before every use.

5).

Periodically check all nuts and bolts to insure they are tight and secure.

6).

Periodically loosen torque spring bolts and allow slip clutch to slip for approximately

 

two (2) revolutions. Loosen the bolts until the springs lose contact with the flange

 

yoke. This ensures that the slip clutch is not in a "locked" position.

7).

Make sure that the clutch slips.

8).

To retighten the slip clutch, tighten the torque spring bolts until the nut makes contact

 

with the flange yoke and further tighten one and a half turns (1-1/2). This is a good

 

starting point , further adjustments may need to be made based on soil conditions.

 

NOTE: Do not over or under tighten slip clutch assembly or damage may occur.

MAINTENANCE SAFETY

zGood maintenance is your responsibility. Poor maintenance is an invitation to trouble. z Follow good shop practices.

z Keep service area clean and dry

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents XB Rotary Tiller Page To the Purchaser Page Contents Safety Equipment Safety Guidelines XB-ROTARY Tiller Assembly Instructions Step Before Putting Rotary Tiller Into ServiceReplace and tighten the plug. Clean away any excess oil Figure D Safety Training Starting and Stopping Safety PreparationOperational Safety Operational Safety Transport Safety Attaching to Tractor Step Sharper than 35 Degrees PTO Must be StoppedAttaching to Tractor Sizing PTO Shaft Step Operating Instructions Step Maintenance Maintenance SafetyStorage Safety Safety Sign Locations Top ViewPage Page Page Page 22 PTO TC-48-XB-TILLER Exploded View TC-48-XB-TILLER Parts List Page Page TC-48-XB Side Gearbox Parts TC-48-XB Side Gearbox Parts List TC-48-XB Series TOP Gearbox Parts TC-48-XB Series TOP Gearbox Parts List Limited Warranty
Related manuals
Manual 36 pages 15.92 Kb

999995 specifications

The King Kutter 999995 is a robust and reliable rotary cutter designed for both agricultural and commercial applications. Known for its durability and efficiency, it stands out as a preferred choice among landowners, farmers, and landscapers who need a dependable tool for land management and brush clearing.

One of the primary features of the King Kutter 999995 is its heavy-duty construction. Built with a rugged, all-steel frame, this rotary cutter is designed to withstand harsh conditions and perform reliably in challenging environments. The cutter’s thick side skirts and reinforced welds provide added strength and support, ensuring that it can handle tough materials like dense brush and thick grass with ease.

Another notable technology incorporated into the King Kutter 999995 is its high-performance blade system. The cutter is equipped with heavy-duty, heat-treated blades that are designed for longevity and superior cutting capability. These blades can be easily sharpened or replaced when necessary, making maintenance simple and ensuring that the cutter remains efficient over time.

The King Kutter 999995 also features a double-gearbox design, which enhances its cutting performance. This dual gear system allows for increased torque, enabling the cutter to tackle tougher materials without bogging down. The gearbox is designed for high-efficiency operation, which minimizes wear and maximizes the lifespan of the machine.

Another key characteristic of this rotary cutter is its compatibility with a wide range of tractors. The King Kutter 999995 is available in a variety of sizes and can be easily attached to both small and large tractors, making it a versatile tool for users with different equipment options. Its user-friendly design allows for quick setup and operation, making it accessible for users of all skill levels.

Safety is also a primary consideration in the King Kutter 999995 design. The cutter is equipped with safety features to minimize the risk of accidents during operation. These include a standard chain guard system that helps prevent debris from flying into the operator's area while cutting.

In summary, the King Kutter 999995 is a top-of-the-line rotary cutter that combines heavy-duty construction, advanced blade technology, and high compatibility with tractors. Its features make it an excellent choice for anyone seeking a reliable tool for land clearing and maintenance, offering both efficiency and safety for various cutting tasks.
Top Page Image Contents