Safety / Installation

GENERAL SAFETY

IMPORTANT SAFETY INSTRUCTIONS

When installing and using this electrical equipment, basic safety precautions should always be followed, including the following:

READ AND FOLLOW ALL INSTRUCTIONS

To reduce the risk of injury, do not permit children to use this product unless they are

closely supervised at all times.

Risk of Electric Shock. Connect only to a properly-grounded, grounding type receptacle. The pump requires 115 volt, single phase current.

The pump is protected by a ground-fault circuit interrupter (GFCI) built into the plug. Do not modify the cord, plug, or GFCI.

Do not bury cord. Locate cord to minimize abuse from lawn mowers, hedge trimmers, and other equipment.

To reduce the risk of electric shock, replace damaged cord immediately.

To reduce the risk of electric shock, do not use an extension cord to connect the unit to the electrical supply; provide a properly located outlet.

SAVE THESE

INSTRUCTIONS

The pump motor is equipped with an automati- cally resetting thermal protector and may restart unexpectedly.

DO NOT plug in the pump while standing in water or on a wet or damp surface.

DO NOT use in water where fish are present (oil in motor can kill fish).

DO NOT pick up the pump by the power cord.

Protect the electrical cord from sharp objects, hot surfaces, oil, and chemicals. Avoid kinking the cord.

Unplug the pump before servicing it or attempting to clean it.

Secure the discharge hose before starting the pump. An unse- cured discharge hose may whip, which can cause personal injury and property damage.

Keep the pump, base, and inlet screen free of debris and for- eign objects.

SPECIFICATIONS

Power supply required	..........................................	115V, 60 HZ.
Liquid Temp. Range		Max. 77°F (25°C)
Operation Position		Vertical
Individual Branch Circuit Required		15 Amp
Operating Depth	Beginning min	3/4"
(water level)	Ending max	1/4"
Discharge		1" NPT (25 mm)

DESCRIPTION

The submersible pump is designed for water removal from pool covers in home swimming pool applications. Unit is construct- ed of hi-impact corrosion resistant plastic. Screened inlet and base prevent large solids from entering pump and protect pool cover.

NOTICE: This unit is not designed for applications involving salt water or brine! Use with salt water or brine will void warranty.

PERFORMANCE

		GPH (LPH) AT TOTAL FEET (M)
3'	5'	10'	15'	18'	20'	22'
(0.91)	(1.52)	(3.05)	(4.57)	(5.49)	(6.09)	(6.70)
1600 gal	1524 gal	1260 gal	924 gal	648 gal	372 gal	0 gal
(6 057 L)	(5 769 L)	(4 770 L)	(3 498 L)	(2 453 L)	(1 408 L)	(0 L)

INSTALLATION

Hazardous voltage. Can shock, burn or cause death. Do not use power cord to lift motor. Always use handle.

1.Pump should always stand upright on base when operating. Do not suspend pump by means of discharge hose or power cord. Keep pump inlet screen clear.

2.To install a garden hose, first install adapter provided with pump.

NOTICE: To keep friction as low as possible, hose must be 5/8" or larger. Keep hose as short as possible.

3.If, in your application, backflow is a problem when the pump stops, prevent it by installing a 1” NPT check valve in the pump discharge.

4.Power Supply: Pump is designed for 115V., 60 HZ. operation and requires an individual branch circuit of

15 amperes or more capacity. It is supplied with a 3-wire cord set with grounding-type, GFCI protected plug for use in a 3-wire, grounded outlet. For safety, pump should always be electrically grounded to a suitable electrical ground such as a grounded water pipe or a properly grounded metallic raceway or ground wire system. Do not cut off the round grounding prong.

Risk of sudden starts. Can result in an elec- trical shock or the pinching of hands or tools. The pump motor is equipped with automatic resetting thermal protec- tor and may restart unexpectedly. Protector tripping is indi- cation of motor overloading as a result of operating pump at high pressure, excessively high or low voltage, inade- quate wiring, incorrect motor connections, or a defective motor or pump.

For parts or assistance, call Simer Customer Service at 1-800-468-7867 /1-800-546-7867

2115 specifications

Simer Pumps has established itself as a leading manufacturer of high-quality pumps, and the Simer Pumps 2115 model exemplifies this reputation. Renowned for its durability and efficiency, the 2115 is designed for various applications, making it a versatile choice for homeowners and professionals alike.

One of the main features of the Simer Pumps 2115 is its powerful motor. With a robust horsepower rating, it can handle demanding tasks with ease, providing reliable performance even in challenging conditions. This strength allows for effective water transfer, whether for dewatering, irrigation, or other fluid moving tasks.

The Simer 2115 is equipped with advanced technology to enhance its operational efficiency. The pump utilizes a durable thermoplastic housing that ensures resistance to corrosion and chemicals, important for longevity and maintenance-free operation. The material choice also contributes to a lightweight design, facilitating easy installation and portability.

Additionally, the pump features an automatic on/off control system, which makes it user-friendly. This smart technology allows the pump to activate when water reaches a certain level, automatically shutting off when the level drops. This feature not only conserves energy but also prevents dry running, which can be detrimental to pump health.

The 2115 model is also designed for quiet operation, minimizing noise pollution and making it suitable for residential areas. Users will appreciate the ergonomic handle that aids in mobility while moving the pump from one location to another.

Another significant characteristic of the Simer Pumps 2115 is its comprehensive warranty, which reflects the company's confidence in the product's durability and performance. This warranty provides peace of mind to users, assuring them that they are investing in a reliable solution for their pumping needs.

In conclusion, the Simer Pumps 2115 represents a blend of power, efficiency, and innovation. With its high-performance motor, advanced materials, smart automation, and user-friendly design, the 2115 is an excellent choice for anyone looking to meet their water moving requirements with confidence. Whether you are dewatering a flooded area, irrigating plants, or managing water in industrial applications, the Simer Pumps 2115 delivers exceptional performance and reliability you can count on.