Scheduled Watering
The
•Standard Irrigation Program will activate a station or group of stations with six start times on a daily basis. Each station will water for the duration specified in hours, minutes and seconds. Percent adjust and maximum number of simultaneous activate stations per program can be specified in this program.
•
To utilize these programs automatically or manually, each program must be configured.
Standard Irrigation Program Setting:
Standard Irrigation Program example: Create Program 02 with stations
1. Press the Scheduled Watering Key . The cursor is initially located at the program selection field. Use the
Input Dial |
| to select the program |
|
2. Press the Right Arrow Key to standard to the Percent Adjust field. Normally this setting will be 100%
unless weather or other condition suggest that less or more irrigation is needed. Use the Input Dial
to adjust the setting. For this example, no adjustment is needed.
3.Press the Down Arrow to advance the cursor to the Hold: field. Use this function to suspend program operation. Select from None, Today,
4. Press the Down Arrow | to advance the cursor to the Type: field. Use the Input Dial |
| to adjust |
|
the setting. For this example, set the Type to Standard.
5. Press the Down Arrow | to advance the cursor to the Days: field. Use the Input Dial |
| to select |
|
the program activation interval from
third day and so on. The example does not call for a set interval. Leave the Days: setting to SMTWTFS...
6. Press the Down Arrow | to advance the cursor to the Set: field. Use the Input Dial |
| to select | ||
| |||||
from any of the preset intervals (All, Alternate days, Weekdays only, Weekends only, None or User set). To | |||||
create your own program activation interval, select Set:. Use the Right Arrow Key | to select the day of the | ||||
week you want to irrigate and use the Input Dial |
| to activate (X) or deactivate (blank) the selection. | |||
|
For this example, activate M (monday), W (wednesday) and F (friday) only. MWF of the 1st and 2nd week
should have an X mark under while the rest are blank.
7. Press the Down Arrow to advance the cursor to the Start: field. The first entry field will indicate the start
time number. Each program can have a maximum of 24 start times. Use the Input Dial |
| to choose |
|
the start time being created or modified. Press the Right Arrow Key to advance to the time entry field.
Use the Input Dial |
| to select the start time in hours and minutes ( HH:MM). Repeat Step 7 for |
|
additional start times. For this example, set start time 01 to 05:45am.
(Continued to the next page)
11