Worksaver SDM40-72, SDM40-48, SDM40-60 manual Make Every DAY Holiday from Accidents

Page 40

SAFETY PRECAUTIONS

MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS.

AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW.

•Machinery should be operated only by those who are responsible and are authorized to do so.

•Stop the engine, lower all equipment, lock the brakes, and remove the ignition key before dis- mounting from the tractor.

•Never stand between tractor and implement while tractor is being backed to hitch.

•Loose fitting clothing should not be worn, to avoid catching on various parts.

•Detach implement in area where children normally do not play.

•When performing adjustments or maintenance on an implement, first lower it to the ground or block it securely at a workable height.

•Only a qualified operator should be permitted on tractor when in operation; no riders allowed.

•Make certain everyone is in the clear before starting tractor or raising or lowering equipment.

•Operate the tractor and implement only while seated in the driver’s seat.

•Reduce speed when transporting mounted implements to avoid bouncing and momentary loss of steering control.

•A heavy load can cause instability of the tractor. Use extreme care during road travel. Slow down on turns and watch out for bumps. Tractor may need front counter-weights to counter-balance the weight of the implement.

•Reduce speed on hillsides or curves so there is no danger of tipping.

•Avoid driving too close to the edge of ditches or creeks.

•Do not transport implement on public roads without reflectors and slow moving vehicle emblem in daylight and with approved warning lights at night and other periods of poor visibility.

•Due to the width of some implements, use extra caution on highways, farm roads, and when approaching gates.

•Always be sure the implement is in the proper position for transport.

•Keep alert and watch the front as well as the rear when working with the implement.

OWNER’S /

OPERATOR’S

MANUAL

MODEL NO’s

SDM40-48

SDM40-60

SDM40-72

WHEN ORDERING

REPAIR PARTS,

ALWAYS GIVE

THE FOLLOWING

INFORMATION:

1.PART NUMBER

2.PART DESCRIPTION

3.MODEL NUMBER

4.NAME OF ITEM

OCTOBER 2001

Equip tractors with roll-over protection (ROPS) and keep all machinery guards in place.

Keep children away from danger all day, every day . . .

Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.

MAKE EVERY DAY

AHOLIDAY FROM ACCIDENTS

W O R K S AVER, INC.

 

P.O. BOX 100 LITCHFIELD, IL 62056-0100 (217) 324-5973

WS-RM002-OG

WEB: http:// www.worksaver.com E-MAIL: sales@worksaver.com

Page 39 Page 40
Image 40
Page 39 Page 40
Contents Standard Duty 3-PT. Mounted Rotary Cutter Table of Contents To the OwnerCutter Specifications Subject Model SDM40-48 Model SDM40-60 Model SDM40-72Delivery Checklist Daily Checklist E C K L I S T SThis Symbol Means Become Alert Your Safety is Involved P O Rtant Safety InformationBefore YOU Start Equipment Safety Guidelines DON’T TRY ITSafety Signs Tire SafetySafety Training Preparation Starting and Stopping Safety Operational SafetyOperational Safety Safety Instructions Transport Safety Maintenance Safety Maintenance Safety Storage SafetySafety Sign Locations Safety Sign LocationsRPM Speed Range only Tractor Requirements and Prepa R Ation For Agricultural USE onlyBlock Cutter in Position CheckedAT TA C H M E N T PTO Driveline Insta L L AtionConnect the PTO Driveline AT this Time Adjusting for Work Gearbox OIL Fill General SafetyPRE Operation Checklist E R Ating Technique E R Ating TipsShredding Uneven TerrainA D E S A N S P O RtingRemoving Cutter from T R a C T O R OptionsRoutine Maintenance B R I C Ation InformationDaily Checks AT the END of Your Cutting SeasonBlade Servicing Shear Bolt ReplacementBlade Sharpening Blade Beam & Gearbox Insta L L Ation Pair of Optional Chain ShieldingBlade Beam & Gearbox R E M O VA L Proper Torque for FA S T E N E R S Troubleshooting Guide Leaves a streak of uncut or partially cut grassMaterial discharges from Cutter seems to require Excessive wear This Warranty Shall not Apply Disclaimer of Implied Warranties & Consequential DamagesPTO Shaft Shear Bolt Protected PA RTS View & PA RTS List Worksaver Description ReqdSDM40-60 PA RTS View SDM40-48 4’ Cutter PA RTS List Part Description ReqdSDM40-60 5’ Cutter PA RTS List SDM40-72 6’ Cutter PA RTS ListComer Gearbox LF-135.802 PA RTS View ’ Cutter Comer Gearbox LF PA RTS List ’ Cutter Worksaver Comer Description ReqdComer Gearbox PA RTS View Comer Gearbox LF PA RTS List Make Every DAY Holiday from Accidents

SDM40-60, SDM40-48, SDM40-72 specifications

The Worksaver SDM series, including models SDM40-72, SDM40-48, and SDM40-60, represents a significant advancement in material handling technology designed for agricultural and landscaping applications. These robust and versatile skid-steer and tractor attachments provide users with an efficient solution for a variety of tasks, including moving and grading soil, gravel, and other materials.

The SDM40-72 model boasts a 72-inch wide blade, while the SDM40-48 and SDM40-60 come with 48-inch and 60-inch blades, respectively. This range in size allows users to choose the perfect model to fit their specific needs and the dimensions of their equipment. The heavy-duty construction of the blades ensures durability and toughness, capable of withstanding rigorous use in demanding environments.

One of the standout features of the Worksaver SDM series is the intelligent design of the blade itself. The blades are equipped with a quick-attach system, making it easy for operators to switch attachments quickly, enhancing productivity on the job site. This feature is particularly valuable for contractors who may need to adapt to varying application requirements throughout the day.

The SDM series also incorporates innovative tilt and angle adjustment mechanisms. This allows operators to fine-tune the blade position for precise material handling and grading. With adjustable tilt angles, users can achieve optimal results whether they are leveling surfaces, backfilling, or creating drainage ditches.

Additionally, the Worksaver SDM models are designed to integrate seamlessly with a variety of skid-steers and tractors, ensuring versatility across different machinery brands. The universal mounting plate allows for quick attachment to most popular equipment models, eliminating compatibility issues that can slow down operations.

Safety is prioritized in the design of the SDM series, which includes reinforced edges and a robust framework. This ensures not only the safety of the operator but also the longevity of the attachment. The blades are constructed from high-quality materials designed to resist wear and enhance performance over time.

In summary, the Worksaver SDM40-72, SDM40-48, and SDM40-60 models are exceptional choices for professionals seeking reliable and efficient material handling solutions. Their innovative features, durable construction, and compatibility with various equipment make them ideal for tackling a wide range of tasks in agricultural and landscaping applications. Users can expect enhanced efficiency and productivity with these outstanding attachments.
Top Page Image Contents