OWNER’S /
OPERATOR’S
MANUAL
MODEL NO’s
SDM40-48
SDM40-60
SDM40-72
CAUTION
For Safe Operation
Read Rules And
Instructions Carefully
SINO LEEINGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA
PARA QUE LE TRADUZCA LAS
MEDIDAS DE SEGURIDAD.
STANDARD DUTY 3-PT. MOUNTED
ROTARY CUTTER
Safety Instructions | Operating Instructions | Maintenance |
Tractor Preparation | Assembly & Mounting | Repair Parts |
C A U T I O N
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
1.Select an area for assembly that is clean and free of any debris which might cause persons working on the assembly to trip.
2.Do not lift heavy parts or assemblies. Use crane, jack, tackle, fork trucks or other mechanical devices.
3.Preview the assembly instructions in your opera- tor’s manual before proceeding further.
4.If the assembly instructions call for parts or assem- blies to be blocked up, use only blocking material that is in good condition and is capable of handling the weight of the assembly to be blocked. Also insure that the blocking material is on a clean, dry surface.
5.Never put hands, or any part of body, under blocked up assemblies if at all possible.
6.After completing assembly, thoroughly inspect the machine to be sure that all nuts, bolts, hydraulic fit- tings or any other fastened assemblies have been thoroughly tightened.
7.Before operating the machine, thoroughly read the operation section of your operator’s manual.
8.Before operating, read the maintenance section of your operator’s manual to be sure that any parts requiring lubrication, such as gearboxes, are full, to avoid any possible damage.
9.Before operating equipment – If you have any questions regarding the proper assembly or operation, contact your Worksaver dealer or representative.