Worksaver EM/2 60, EM/2 72 warranty Safety Precautions, PT. Rear Finishing Mower

Page 42

SAFETY PRECAUTIONS

MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS.

AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW.

•Machinery should be operated only by those who are responsible and are authorized to do so.

•Stop the engine, lower all equipment, lock the brakes, and remove the ignition key before dismounting from the tractor.

•Never stand between tractor and implement while tractor is being backed to hitch.

•Loose fitting clothing should not be worn, to avoid catch- ing on various parts.

•Detach implement in area where children normally do not play.

•When performing adjustments or maintenance on an implement, first lower it to the ground or block it securely at a workable height.

•Only a qualified operator should be permitted on tractor when in operation; no riders allowed.

•Make certain everyone is in the clear before starting tractor or raising or lowering equipment.

•Operate the tractor and implement only while seated in the driver’s seat.

•Reduce speed when transporting mounted implements to avoid bouncing and momentary loss of steering control.

•A heavy load can cause instability of the tractor. Use extreme care during road travel. Slow down on turns and watch out for bumps. Tractor may need front counter- weights to counter-balance the weight of the implement.

•Reduce speed on hillsides or curves so there is no danger of tipping.

•Avoid driving too close to the edge of ditches or creeks.

•Do not transport implement on public roads without reflectors and slow moving vehicle emblem in daylight and with approved warning lights at night and other periods of poor visibility.

•Due to the width of some implements, use extra caution on highways, farm roads, and when approaching gates.

•Always be sure the implement is in the proper position for transport.

•Keep alert and watch the front as well as the rear when working with the implement.

OWNER’S

MANUAL

MODEL NO’s

EM/2 60

EM/2 72

APRIL 2000

3 PT. REAR FINISHING MOWER

For Cat. I 3-Pt. Hitch Tractors up to 35 HP

WHEN ORDERING REPAIR PARTS, ALWAYS

GIVE THE FOLLOWING INFORMATION:

1.

PART NUMBER

3.

MODEL NUMBER

2.

PART DESCRIPTION

4.

NAME OF ITEM

 

 

 

 

 

WORKSAVER LIMITED WARRANTY

Wo rksaver warrants its implements, parts and accessories to be free from defects in materials and workmanship for a period of six (6) months from date of purchase. Upon written approval, Worksaver will repair or exchange with- out charge any part, which upon examination by Worksaveror its authorized agent, shall disclose to be defective.

This does not apply to (1) parts that have worn out in normal use, (2) parts broken because of improper assembly or operation by the customer, (3) parts accidentally damaged, (4) failure of parts traceable to improper care, (5) parts failing through use of implement for purposes other than those for which it was designed.

The obligations assumed by Worksaver and the limitations expressed herein are in lieu of all other warranties expressed or implied.

W O R K S A V E R , I N C .

WS-FM001-OG

P.O. BOX 100 LITCHFIELD, IL 62056-0100 (217) 324-5973

Page 41 Page 42
Image 42
Page 41 Page 42
Contents PT. Rear Finishing Mower Retail CUSTOMER’S Responsibility Delivery Checklist PRE Operation ChecklistTo the Owner/Operator/Dealer Before YOU StartSafety Instructions Equipment Safety GuidelinesSafety Signs Tire SafetySafety Training Preparation Starting and Stopping Safety Operational SafetyOperational Safety Safety Instructions Transport Safety Maintenance Safety Maintenance Safety Storage SafetySafety Sign Location Replace Safety Signs if Damaged or Missing To prevent serious injury or death N G E R S T R U C T I O N S Tractor Requirements and Prepa R AtionS E M B LY Instructions Cutting Height Adjustment E R Ation InstructionsTractor Prepa R Ation Taching and Storing Cutting SpeedCutting Tips Before OperatingAdjusting Driveline Length Front Gauge Wheel Interference CheckDriveline Length Check P R O C E D U R E Troubleshooting StreakingTroubleshooting Gearbox Lubrication Maintenance InstructionsB R I C AT I O N Gauge Wheel AssembliesBlade Servicing Driveline LubricationBlade Spindle Lubrication Blade SharpeningDrive Belt Adjustment Drive Belt R E M O VAL and Insta L L AtionBlade Spindle Service Instructions Assembly O R a G ELW AY S Obey ALL Safety Rules LW AYS be Careful Replacement PA RT S Table of ContentsN E R a L M O W E R a S S E M B LY PA RTS Draw I N G PA RTS List A R B O PA RTS Draw I N G A R B O PA RTS List PA RTS Draw I N G PA RTS List Page Page Page Safety Precautions PT. Rear Finishing Mower

EM/2 60, EM/2 72 specifications

The Worksaver EM/2 series, specifically the EM/2 60 and EM/2 72 models, offers innovative solutions for a range of agricultural and landscaping tasks. Designed for efficiency, durability, and versatility, these implements are engineered to meet the demands of modern farming and yard management.

One of the standout features of the Worksaver EM/2 models is their robust construction. Built with high-quality materials, the EM/2 60 and EM/2 72 ensure longevity and resistance to wear from heavy use. The heavy-duty framework and reinforced components provide not only strength but also stability during operation, making these attachments suitable for various ground conditions.

A critical aspect of the EM/2 series is their advanced design, which allows for easy attachment to a variety of tractors and machinery. The quick-attach implement system streamlines the process of connecting and disconnecting the equipment, saving users valuable time and effort during their daily operations. This user-friendly design minimizes downtime and maximizes productivity.

In terms of functionality, both models come equipped with adjustable working widths, enabling users to customize their approach based on field size and job requirements. The EM/2 60 offers a width of 60 inches, while the EM/2 72 features a 72-inch width, allowing for flexibility whether it's grading, land leveling, or vegetation management.

The technology behind the Worksaver EM/2 series also places a strong emphasis on ease of operation. The angled blade design facilitates more efficient soil movement and material distribution, achieving better results with less effort. Additionally, the implement's ability to adapt to different terrains contributes to its effectiveness in various applications, from farmfields to residential landscaping projects.

Safety is paramount with the EM/2 models, featuring built-in safety mechanisms that ensure secure operation. The design not only protects the user but also enhances the overall operational stability of the implement, allowing for safe and effective use even in challenging environments.

Overall, the Worksaver EM/2 60 and EM/2 72 represent a significant advancement in implement technology, combining strength, user-friendliness, and adaptability. These models are ideal for farmers, landscapers, and land management professionals looking for reliable equipment that can tackle a wide range of tasks efficiently and safely, making them valuable additions to any agricultural operation.
Top Page Image Contents