Rugged, versatile Frontier landsc

details - box Blades

Practical Frontier Box Blades are built for tough jobs. A heavy-

duty mast constructed of thick, 3/8-inch plate steel delivers superior rigidity and strength. Endplates have a formed, top edge for extra muscle … there’s no need for gussets. And check out the 3/8x1-inch strap inside the scarifier tube. It provides reinforce- ment, shank support, and prevents premature wearing on the slots.

Choose from three scarifier depth adjust- ments to meet a variety of ground conditions. Shanks can be stored on the scarifier beam when using the box blade for other tasks.

The 20 Series Standard-Duty Box Blades are compatible with tractors of 17 to 55 horse- power with a Category 1 hitch. Four working widths are available, from 48 to 72 inches.

For tractors up to 70 horsepower with a Category 1 hitch, the 21 Series Medium-Duty Box Blades come in two working widths: 72 and 84 inches.

Choose from three scarifier depth adjustments to meet a variety of ground conditions. Adjustments are easy! Simply remove the steel pin, and raise or lower the scarifier to increase or decrease ground penetration. Scarifier shanks can be stored on the scarifier beam when using the box blade for other tasks.

Heavy-duty, concave back plate with formed upper edge provides added rigidity and strength for trouble-free performance.

Cutting edges are positioned 3/4-inch below the endplates to ensure precise leveling and a fine finish. They’re also reversible for extended life.

Endplates are formed along top edge for structural strength. On the 21 Series the 3/8x3-inch steel reinforcement plates along the bottom edges give the

box blade additional strength and durability.

Tailgates on the 21 Series float, allowing material to flow through the blade during heavy grading conditions.